Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Do not reach into the machine when the drum
is spinning.
Do not use extension cords, multi-plugs
or adaptors to connect the dryer to power
supply in order to decrease the risk of fire and
electric shock.
Never wash the product by spreading or
pouring water onto it! There is the risk of
electric shock!
The final step of the drying programme,
namely the cool-down step is performed
without applying heat to ensure that the
laundry items are kept at a temperature that
will not damage them. If you open the loading
door before the cool-down step completes,
hot vapour will come out.
A
Never stop the dryer before the programme
completes. If you must do this, remove all
laundry quickly and lay them out to a suitable
place to dissipate the heat.
Always clean the lint filter before or after each
loading. Never operate the dryer without the
lint filter installed.
Clean inside and exhaust duct of the product
regularly. Do not allow fibre, dust and dirt
accumulation around the exhaust exit and at
adjacent areas.
Power cable plug must be within easy reach
after installation.
Do not dry unwashed items in the dryer.
Items soiled with cooking oils, acetone,
alcohol, fuel oil, kerosene, stain removers,
turpentine, paraffin and paraffin removers
must be washed in hot water with plenty of
detergent before being dried in the dryer.
Garments or pillows bolstered with rubber
foam (latex foam), shower bonnets, water
resistant textiles, materials with rubber
reinforcement and rubber foam pads should
not be dried in the dryer.
Do not use fabric softeners and anti-static
products unless they are recommended by
the manufacturers of the relevant product.
Use softeners, anti-static products and etc.
in accordance with the instructions of their
manufacturers.
Do not install the product behind a door with
a lock, sliding door or a hinged door which
can strike the product.
Do not install or leave the dryer in places
where it will be exposed to outdoor
conditions.
Your product can be operated at temperatures
between +5°C and +35°C. If the operating
conditions fall outside of this range, operation
of the product will be adversely affected and
it can get damaged.
Do not tamper with the controls.
Unplug the product when it is not in use.
Remove the loading door of the drying
compartment before decommissioning or
disposing of the product.
Check all garments before loading and make
sure that there is no any lighters, coins, metal
pieces, needles, and etc. in their pockets or
on them.
Make sure that the pets do not enter into
the product. Check the drum of the product
before using it.
Make sure that original spare parts and
accessories are used during maintenance
works.
Do not lean on the loading door when it is
open. The product may tip over.
When your machine is not in use or when you
unload the laundry after completion of drying
process, turn the machine off with the On/Off
button. In cases where the On/Off button is in
On position (while the machine is energized),
keep the loading door closed.

Intended use

This product has been designed for domestic
use. It should not be used for other purposes.
Product must only be used for drying of
textiles that are marked accordingly.
Dry only those articles in your product that
are stated in this manual.
This product is not intended to be used by
persons with physical, sensory or mental
disorders or unlearned or inexperienced
people (including children) unless they are
30 EN

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis