Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
Do not make connections via extension cables
or multi-plugs.
•
The main fuse and switches must have a
contact distance of minimum 3 mm.
B
Damaged power cable must be replaced by
the Authorized Service Agent.
B
If the product is faulty, it must not be operated
unless it is repaired! There is the risk of
electric shock!
First use
Before starting to use the product, make sure
that all preparations are made in accordance
with the instructions in sections "Important safety
instructions" and "Installation".
Transportation of the product
1. Unplug the product before transporting it.
2. Remove the water drain (if any) and chimney
connections.
3. Drain the water in the product completely.
A
We recommend carrying the product in
upright position. If it is not possible to carry
the machine in the upright position, we
recommend carrying it by tilting towards the
right side when looked from the front. After
the product is moved to its new place, you
should wait for 12 hours before starting it.
Warnings about sounds
C
It is normal to hear metallic noise from the
compressor sometimes during operation.
C
Water collected during operation is pumped
to water tank. It is normal to hear pumping
noise during this process.
34 EN
Werbung
Inhaltsverzeichnis
