Introduction; Safety Instructions - Omnitronic LH-115 Bedienungsanleitung

LH-115 Monitor mixer
For your own safety, please read this user manual carefully before you initial start-up.
Every person involved with the installation, operation and maintenance of this device has to
- be qualilfied
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- download the latest version of the user manual from the Internet

INTRODUCTION

Thank you for having chosen an OMNITRONIC LH-115. If you follow the instructions given in this manual,
we are sure that you will enjoy this device for a long period of time.
Unpack your LH-115.
Features
Monitor mixer for studio and stage applications
• Connects a microphone and a further audio source for monitoring
• 1 microphone input via balanced XLR connector with level control
• 1 feed-through output (XLR, bal.)
• 1 aux input via 6.3 mm jack with level control
• 2 headphone outputs via 6.3 mm jacks
• Operation via supplied power unit

SAFETY INSTRUCTIONS

This device has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will
not accept liability for any resulting defects or problems.
Please make sure that there are no obvious transport damages. Should you notice any damages on the
power unit or on the casing, do not take the device into operation and immediately consult your local dealer.
USER MANUAL
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
7/10 00036895.DOC, Version 1.0