Pkm BIC3 I-GK-IX-2 Bedienungsanleitung Seite 28

Make an installation-opening with the dimensions given on the drawing below).
Fix the supplied sealing tape on the corresponding place of the hob.
Check the seal for perfect fit and overall cover. Insert the electric hob in the
opening and align it correctly.
Using a standard screwdriver, tighten the tension clamps evenly starting at the
centre and moving diagonal, until the built-in rim is tight on the worktop.
The hob must be vented properly. Air inlet and air outlet must not be blocked.
Min. safety distance between hob and a cupboard
above = 76 cm.
A: Air inlet
28