Channel Search - Xoro HRS 8588 Bedienungsanleitung

Channel Search

There appears a window showing "Channel Search" upon pressing the BLUE button on the menu of the
Satellite Setting.
On this Window you can make three entries to affect the scan result.
Search Mode:
Standard: The receiver scans channels according to a pre programmed list. This search proc-
ess goes quickly but without being able to find programs on new transponders.
Blind search: The receiver scans every possible frequency. It takes a little bit more time than
standard scan. However it is possible to find programs from unknown transponders.
Network: The receiver scans channels according to a pre programmed list. The frequency of
a new transponder could be found out through analysis of the known transponders. The scan
process is shorter than "blind scan", but there might be possibly missing programs.
Please employ "Blind Scan". It takes a little bit longer, but will result in a complete program list.
If you have added a new satellite on the menu of Satellite Setting, please employ "Blind scan", for
there is no transponder list available for the newly added satellite. There is no "Blind scan" option in
case of UniCable system.
Encrypted:
All programs: both free and encrypted programs (Pay TV)
will be added to the program list during the channel scan.
FTA (free): The channel scan saves only free programs.
The XORO HRS8588 can not decrypt Pay-TV programs. Please select "FTA" (free programs), so that
you will get a shorter program list and save some time in sorting the programs.
Service Type:
All: The channel scan saves both TV and
Radio programs.
DTV: The channel scan saves only TV
programs.
Radio: The channel scan saves only Radio
program.
Press the OK button to start the Channel scan.
After the channel scan is completed, live picture of the first found channel will be shown on the
screen.
20
Initial Installation
HRS 8588