Achten Sie auf die richtige Ausrichtung der Schüssel zu dem Satelliten. Hinweis: Bei ASTRA oder anderen Betreibern können die Sie die notwendigen Positionen und Ausrichtung für Ihren Standort entnehmen. Mit den Winkelwerten Evaluation und Azimut richten Sie die Schüssel ein. HRS 8600 CI...
Seite 6
Sichern Sie alle Daten des USB Speichers. Wir empfehlen, wenn Sie mit dem HRS 8600 CI Sendungen aufnehmen oder die Time Shift Funktion nutzen, benutzen Sie einen separaten USB Speicher und kopieren Sie nie wichtige Daten darauf.
Seite 7
CAM-Modul und Abo-Karte für Pay-TV sind nicht teil des Lieferumfangs Dolby Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trade- marks of Dolby Laboratories. Confidential Unpublished works. 1992-1997 Dolby Laboratories, Inc. All rights reserved. HRS 8600 CI...
Seite 8
Achten Sie auf den Durchmesser der Satellitenschüssel. Ist dieser zu klein, dann kann es bei schlechten Wetter zu Störungen kommen. Mit einer größeren Schüssel (80 cm) haben Sie auch bei schlechteren Wetter größere Reserven. • Achten Sie auf die richtige Ausrichtung der Schüssel zu dem Satelliten. HRS 8600 CI...
Jeder Verbraucher ist gesetzlich verpflichtet, diese Batterien bei einer Sammelstelle seiner Gemeinde oder im Handel abzugeben, damit sie einer umweltschonenden Entsorgung zugeführt werden kön- nen. Gebrauchte Batterien entsorgen auch wir kostenlos und umweltgerecht für Sie. Einfach an uns zurücksenden. HRS 8600 CI...
Zubehör / Eigenschaften Mitgeliefertes Zubehör Bitte vergewissern Sie sich, dass folgende Zubehörteile in der Verpackung enthalten sind: • HRS 8600 CI • Fernbedienung • Bedienungsanleitung • Garantiekarte Hinweise: • Veränderungen oder Modifizierungen der Bestandteile des Lieferumfangs führen zum Erlö- schen der Garantie.
SCART Ausgang TV Stromkabel RF Ausgang (LOOPOUT) FBAS Videoausgang (CVBS) Stereo Tonausgang (L / R) HDMI Ausgang Digital Audioausgang (koaxial / elektrisch) Hinweis: Achten Sie bei der Installation des Antennenkabels darauf, dass das Gerät vom Stromnetz getrennt ist. HRS 8600 CI...
Richten Sie die Fernbedienung immer auf das Sensor-Feld des Gerätes. Die Entfernung zu dem Gerät sollte nicht mehr als 5 Meter betragen und der Operationswinkel nicht größer als 60° sein. Entfernen Sie die Batterien aus der Fernbedienung, wenn Sie den HRS 8600 CI eine längere Zeit nicht benutzen. Hinweise: Entfernen und erneuern Sie alte Batterien.
GELB und Langsame Wiederga- be (SLOW) • BLAU und Bookmark Hinweis: Die Farbtasten Grün, Rot, Gelb und Blau haben in den verschiedenen Modi unterschiedliche Funktionen. Die Arbeitsweise der Tasten wird in den Modi immer erklärt und dargestellt. HRS 8600 CI...
Die schematische Zeichnung zeigt die Verbindungen des HRS 8600 CI zu der Antenne und zu dem TV-Gerät. Vorgehensweise: Stecken Sie an dem HRS 8600 CI ein SCART oder HDMI Kabel an dem SCART oder HDMI Ausgang Schließen Sie das Kabel mit dem SCART bzw. HDMI Eingang Ihres Fernsehgerätes an Verbinden Sie das Antennenkabel mit dem Antenneneingang (LNB IN) des HRS 8600 CI.
Trennen Sie auch die Geräte von dem Stromnetz. Etablieren Sie die Video-Übertragung mittels eines SCART oder eines HDMI Kabels zu Ihren TV Fernsehgerät. Verbinden Sie den HRS 8600 CI mit einem koaxialem Kabel zu Ihren externen Decoder oder Verstärker. Schalten Sie beide Geräte an.
Verbindung Common Interface Der HRS 8600 CI ermöglicht einerseits das Empfangen Free-to-Air TV Programme wie z.B. ARD HD oder ZDF HD und anderseits das Empfangen von Bezahlfernsehen wie z.B. ORF HD. Für das An- schauen von Free-to-Air sind keinerlei Komponenten mehr nötig, jedoch ist das Programmangebot gerade bei HDTV eingeschränkt.
Bei USB Speichermedium wird nur FAT, FAT 32 oder NTFS unterstützt. Falls ein Medium mit einem anderen Dateisystem formatiert ist, dann wird diese nicht erkannt. Sichern Sie immer alle Daten von dem USB Speicher, wenn dieser an dem Gerät benutzt wird. HRS 8600 CI...
Fernseher. Nutzen Sie bei der Erstinstallation eine SCART Verbindung zwi- schen HRS 8600 CI und Ihrem TV-Gerät. Bei der ersten Inbetriebnahme des HRS 8600 CI erscheint auf dem TV-Bildschirm das Einstellung - Installationsmenü. Dieses Menü enthält folgende Optionen:...
Die LNB Spannung kann manuell verändert werden. Dies hat einen direkten Einfluss auf das Sucher- gebnis. Die Optionen sind Aus, 13V, 18V und 13/18V. Wird die Option Aus gewählt, dann wird der LNB nicht mehr von dem Empfänger mit Spannung versorgt. Es können auch dann keine Programme mehr empfangen werden. HRS 8600 CI...
Seite 20
Kanal Typ Hier können Sie festlegen, ob Sie bei dem Suchlauf nur unverschlüsselte Sender empfangen möch- ten oder alle (einschließlich Pay TV) Sender. Wenn Sie eine Abo-Karte in dem HRS 8600 CI nutzen möchten, dann sollten Sie die Einstellung Alle auswählen.
Seite 21
Erstinstallation Suchlauf Nachdem die weiteren Suchparameter eingestellt wurden, drücken Sie die OK Taste und der Such- lauf beginnt. Die empfangenden Sender werden in den entsprechenden Listen angezeigt und nach Beendigung des Suchlaufes abgespeichert. HRS 8600 CI...
Seite 22
Nutzung mehrerer Satelliten via USALS (ab Seite 28) Einkabelsystem / Unicable (ab Seite 29) Hinweis: Wenn Sie im Einstellungsmenü in die Installation müssen, fragt der Empfänger nach dem Passwort. Geben Sie jetzt 0 0 0 0 ein und der Zugang ist erlaubt. HRS 8600 CI...
Seiten). Alle empfangenen TV und Radio Sender werden in den beiden Listen angezeigt. Nach dem Suchlauf werden die TV und Radio Sender in den beiden Listen abgespeichert und das Gerät wechselt in das Livebild des ersten TV Senders. HRS 8600 CI...
Alle empfangenen TV und Radio Sender werden in den beiden Listen angezeigt. Nach dem Suchlauf werden die TV und Radio Sender in den beiden Listen abgespeichert und das Gerät wechselt in das Livebild des ersten TV Senders. HRS 8600 CI...
Reihe nach abgesucht. Alle empfangenen TV und Radio Sender werden in den beiden Listen angezeigt. Nach dem Suchlauf werden die TV und Radio Sender in den beiden Listen abgespeichert und das Gerät wechselt in das Livebild des ersten TV Senders. HRS 8600 CI...
Navigieren Sie mit der Pfeiltaste UNTEN zu der Option Motoreinstellung und drücken Sie die OK Taste. Sie sehen jetzt ein Auswahlmenü. Wählen Sie mit der Pfeiltaste UNTEN die Option DiSEqC 1.2. Das Menü wird jetzt um die DiSEqC 1.2 Einstellungen erweitert. HRS 8600 CI...
Seite 27
Alle empfangenen TV und Radio Sender werden in den beiden Listen angezeigt. Nach dem Suchlauf werden die TV und Radio Sender in den beiden Listen abgespeichert und das Gerät wechselt in das Livebild des ersten TV Senders. HRS 8600 CI...
Alle empfangenen TV und Radio Sender werden in den beiden Listen angezeigt. Nach dem Suchlauf werden die TV und Radio Sender in den beiden Listen abgespeichert und das Gerät wechselt in das Livebild des ersten TV Sender. HRS 8600 CI...
Das Menü erweitert sich um die beiden neuen Einstellungen „IF Freq.“ und „Sat Position“. Wählen Sie die Option „IF Freq.“ mit der Pfeiltaste UNTEN an. Starten Sie die Option mit der OK Taste. Drücken Sie erneut die OK Taste damit Sie die weiteren Einstellungen bearbeiten können. HRS 8600 CI...
Seite 30
Alle empfangenen TV und Radio Sender werden in den beiden Listen angezeigt. Nach dem Suchlauf werden die TV und Radio Sender in den beiden Listen abgespeichert und das Gerät wechselt in das Livebild des ersten TV Sender. HRS 8600 CI...
Wenn Sie den gesuchten Sender in der gefilterten Liste sehen, drücken Sie die BLAUE Taste und kehren in die Kanalliste zurück. Drücken Sie bei dem gewünschten Kanal die OK Taste und das Ge- rät wechselt zu diesem. HRS 8600 CI...
Funktionen Wichtige Tasten und deren Funktionen Kanalliste filtern Der HRS 8600 CI bietet die Möglichkeit die Ka- nalliste zu filtern. Drücken Sie die BLAUE Taste und die Kanalliste wird um die Filteroptionen erweitert. Mit den Tasten ▲(CH+)/▼ (CH-) kön- nen Sie eine der angebotenen Optionen auswäh- len.
Mit den Tasten des Navigationskreuzes (▲/▼/◄/►) können Sie sich in den verschiedenen Ebenen des Einstellungsmenüs bewegen. Lautstärke Mit den Tasten ◄/► (VOL+ / VOL-) ändern Sie die Lautstärke an dem DVB-S Empfänger. Stummschaltung Drücken Sie die MUTE Taste auf der Fernbedienung. HRS 8600 CI...
Den Programmtitel der nächsten Sendung können Sie mit der ► Taste anwählen. Ein weiteres mal die INFO Taste oder wahlweise die EXIT Taste beendet die Informationsanzeige. TV / Radio Wenn Sie zwischen den TV und Radio wechseln möchten, dann Drücken Sie die TV/R Taste. HRS 8600 CI...
Sendung. Drücken Sie jetzt die GRÜNE Taste und die Sendung wird in dem Timer übernommen (Erinnerung). Erneutes Drücken der Taste ändert den Modus zu Aufnahme. Nochmaliges Drücken der Taste schaltet die Timerprogrammierung der Sendung wieder ab. HRS 8600 CI...
Seite 36
Sendung. Drücken Sie jetzt die GRÜNE Taste und die Sendung wird in dem Timer übernommen (Erinnerung). Erneutes Drücken der Taste ändert den Modus zu Aufnahme. Nochmaliges Drücken der Taste schaltet die Timerprogrammierung der Sendung wieder ab. HRS 8600 CI...
Liste der unterstützten CAM-Module Möchten Sie Pay-TV anschauen, dann benötigen Sie für den HRS 8600 CI ein CAM-Modul mit der entsprechenden Abo-Karte. Folgende CAM-Module werden unterstützt. Verschlüsselungssystem Modul Conax SMIT Conax Conax Alphacrypt von MAS Com Conax Ulti-mate von SCM Microsystems...
Schließen Sie für eine Aufnahme, Time-Shift oder eine Aufnahmeprogrammierung einen USB Spei- cher an dem USB Anschluss des HRS 8600 CI an. Beachten Sie die Hinweise auf Seite 6. Der HRS 8600 CI unterstützt NTFS, FAT 32 und FAT Dateisysteme. Alle anderen werden nicht er- kannt.
Bestätigen Sie die Sicherheitsabfrage mit „Ja“ und die Programmierung wird aus der Liste ge- löscht. Alle Programmierungen löschen Drücken Sie die ROTE Taste (unten) auf der Fernbedienung und bestätigen Sie die Sicherheitsabfra- ge mit „Ja“. Danach werden alle Programmierungen gelöscht. HRS 8600 CI...
Seite 40
Aufnahmen können auch von dem EPG Fenster übernommen werden. Bitte bearbeiten Sie die An- fangszeit und Dauer einer solchen Aufnahme am Anfang und Ende mit einigen Minuten Puffer. Be- sonders das Aktuelle Sportstudio auf ZDF am Samstag neigt zu Zeitüberschreitungen. HRS 8600 CI...
Aufnahmen angezeigt und können auch nur ab- gespielt werden. Wenn Sie die Aufnahmen lö- schen bzw. umbenennen möchten, dann müssen Sie zu dem Aufnahmemanager des Media- Players wechseln. Dort können Sie: • Formatieren • Aufnahmen löschen • Aufnahmen umbenennen HRS 8600 CI...
Auswahlmenü. Die MENU Taste öffnet das Einstellungsmenü des Gerätes und dann können Sie zum Beispiel die AV Einstellungen (z.B. Auflösung oder Seitenver- hältnis) ändern, ohne den Film zu unterbrechen. Der Media-Player wird durch die MEDIA Taste beendet. HRS 8600 CI...
Bilder anzeigen Photo Wenn Sie Bilder mit dem HRS 8600 CI anzeigen möchten, schließen Sie einen USB Speicher an und rufen Sie den Menüpunkt Foto auf. Wechseln Sie mit der ▼ Taste in den Dateibrowser. Drücken Sie die OK Taste und der Dateninhalt des USB Speichers wird ausgelesen und in dem Browser angezeigt.
Animatied GIF Musik Wenn Sie Musikdateien mit dem HRS 8600 CI abspielen möchten, schließen Sie einen USB Spei- cher an und rufen Sie den Auswahlmenü Musik auf. Wechseln Sie mit der ▼ Taste in den Dateibrow- ser. Drücken Sie die OK Taste und der Dateninhalt des USB Speichers wird ausgelesen und in dem Browser angezeigt.
Öffnet den Lautstärkeregler Aktiviert die Zufallswiedergabe ID Tag Informationen Die ID Tags werden angezeigt, sofern diese vorhanden sind. Unterstützte Formate Der HRS 8600 CI unterstützt folgende Parameter bei den Musikdateien: Codec Endung Bitrate [kbps] Sampling Frequenz [kHz] MPEG-1 Layer 2...
H.264: High—Level 4 MPEG-2: Main Wenn Sie Filme mit dem HRS 8600 CI abspielen möchten, schließen Sie einen USB Speicher an und rufen Sie den Auswahlmenü Film auf. Wechseln Sie mit der ▼ Taste in den Dateibrowser. Drücken Sie die OK Taste und der Dateninhalt des USB Speichers wird ausgelesen und in dem Browser an- gezeigt.
Seite 47
Bookmark erhalten. Wenn Sie das Video erneut starten und die BLAUE Taste drücken, finden Sie Ihren gespeicherten Bookmark wieder. Drücken Sie jetzt die ROTE Taste und dann springt der HRS 8600 CI zu dem gespeicherten Bookmark im Film. HRS 8600 CI...
„Ja“ Feld. Die Aufnahme wird dann gelöscht. Löschen aller Aufnahmen Drücken Sie die BLAUE Taste auf der Fernbedienung wenn Sie alle Aufnahmen löschen möchten. Bestätigen Sie die Sicherheitsabfrage mit der OK Taste auf dem „Ja“ Feld. Die Aufnahmen werden gelöscht. HRS 8600 CI...
Schließen Sie zuerst den USB Speicher an und drücken Sie während des Livebildes die MEDIA Tas- te. Wechseln Sie mit den Pfeiltasten ◄/► die Kategorien bis Sie den Speichermanager erreicht ha- ben. Wechseln Sie mit der ▼ Taste in den Dateibrowser. HRS 8600 CI...
Seite 50
Datei kopiert. Dabei wird ein Duplikat im Zielverzeichnis erstellt. Verschieben einer Datei Wenn Sie eine Datei und das Zielverzeichnis ausgewählt haben und die BLAUE Taste drücken, dann wird die entsprechende Datei verschoben. Dabei wird im Quellverzeichnis die Datei gelöscht und im Zielverzeichnis neu geschrieben. HRS 8600 CI...
Das Installationsmenü ist zwischen den Seiten 18 und 28 ausführlich beschrieben. Kanal Das Menü Kanal enthält die Untermenüs Kanalmanager, Favoritenliste und Kanaleinstellung. Kanalmanager Mit dem Untermenü haben Sie die Möglichkeit die gefundenen Sender entsprechend Ihren Wün- schen zu sortieren bzw. zu bearbeiten. HRS 8600 CI...
Seite 52
Löschen aller Sender • Umbenennen Sortieren Mit dieser Option können Sie die Sender nach den Vorgaben (Z-A, verschlüsselt, unverschlüsselt und A-Z) innerhalb der Liste sortieren. Drücken Sie die ROTE Taste und das Auswahlmenü erscheint auf dem Bildschirm. HRS 8600 CI...
Wählen Sie mit den ▲/▼ Tasten den TV Sender aus, den Sie in die Favoritenliste ablegen möchten. Drücken Sie eine Taste (1 bis 8) und der ausgewählte Sender wird in eine der acht Favoritenliste gespeichert. Kanaleinstellung Hier können Sie zum Beispiel Ihren persönlichen Startsender definieren. HRS 8600 CI...
Deutsch, Englisch, Französisch, Spanisch, Italienisch, Portugiesisch und Schwedisch. Untertitel Sprache Hier können Sie die Untertitel Sprache einstellen. Hinweis: Viele Sender übertragen keine Untertitel. Gehörlostitel Hier können Sie die Untertitel für Gehörlos oder Schwerhörige einstellen. Audio Sprache Hier können Sie die bevorzugte Audio-Sprache auswählen. HRS 8600 CI...
Seite 55
Mit dieser Einstellung können Sie die Übergangseffekte bei der Diavorstellung definieren. Es sind eine Vielzahl von möglichen Effekte möglich. Wenn Sie keine Effekte bei der Diavorstellung haben möchten, dann schalten Sie diese ab (Option Aus). Ansonsten wäre eine zufällige Auswahl der Effek- te empfehlenswert (Option zufällig). HRS 8600 CI...
Seite 56
Hiermit können Sie definieren, ob die Time-Shift Aufnahme permanent gespeichert werden soll oder nicht. Wird immer gespeichert Nach beenden von Time-Shift wird die Datei gelöscht Empfehlung: Nutzen Sie die Option Aus. Ansonsten kann der USB Speicher schnell voll werden. HRS 8600 CI...
Die weiteren Optionen sind: Systemsicherung Passwortabfragen bei bestimmten Optionen wie z.B. Suchlauf. Pinnummer ändern Hier können Sie das Standardpasswort von 0 0 0 0 auf eine andere vierstellige Zahl ändern. Version Anzeige von Versionsangaben wie Software oder Hardware. HRS 8600 CI...
Seite 58
Hiermit können Sie eine neue Softwareversion auf dem Gerät installieren. Dazu muss natürlich ein USB Speicher mit ausschließlich der Update Datei im Hauptverzeichnis angeschlossen werden. Weiter Informationen befinden sich in unserer Downloadseiten von Xoro.de. Wichtig Schalten Sie während des Updatevorgangs niemals den Strom aus!
Seite 59
Rahmens für die Festlegung von Anforderungen an die umweltgerechte Gestaltung ener- giebetriebener Produkte. Das bedeutet, nach 3 Stunden Laufzeit in DVB-S Modus ohne einen Tastendruck schaltet der HRS 8600 CI automatisch in den Stand-By Modus. Weitere Optionen sind 1 Std., 2 Std. und Aus. HRS 8600 CI...
Seite 60
Stumm. Andernfalls Bitstream. Videoausgang Wählen Sie die Einstellung aus, wie Sie das Bild an Ihrem TV Gerät ausgeben. Die Optionen sind CVBS (für FBAS, SCART), RGB (für SCART), HDMI (für HDMI) und YUV (für Videokomponenten- ausgang). HRS 8600 CI...
Seite 61
Farbkanal dar. Die Spezifikation HDMI 1.3 unterstützt diesen Standard, der vor allem eine deutlich höhere Bandbreite erfordert. Die Optionen sind 8bit, 10bit und 12bit. Hinweis: Achten Sie bei dem Ändern dieser Einstellung auf die entsprechende Unterstützung Ihres TV Gerä- tes. HRS 8600 CI...
Einstellungen Spiele Der HRS 8600 CI enthält eine Reihe von installierten Spiele für den Zeitvertreib. Bitte beachten Sie bei den jeweiligen Spiel die Bedienungsführung. Sie haben aber auch die Möglichkeit über den Media-Player 32bit Spiele zu spielen. Diese müssen Sie allerdings zuerst downloaden unter www.native32.com/english. Neben den Spielen benötigen Sie auch das UI-Softwarepaket.
Seite 63
Problembehebung Bitte beachten Sie die folgende Liste zur Behebung möglicher Probleme, bevor Sie den Kundenservi- ce kontaktieren. Technischer Kundenservice von Xoro/MAS: • Tel.: 040 77 11 09 17 • Fax: 040 77 73 55 15 • Internet: www.xoro.de/support.htm Symptom Ursache und Lösung •...
USB 2.0 High Speed Video: HDMI, Videokomponenten, SCART, FBAS (CVBS) Audio: Koaxial Cinch, Stereo Cinch Andere: Common Interface für CAM Module Gerät Gewicht: 0,80 Kg Abmessungen: 270 x 165 x 43 mm Hinweis: Spezifikationen können sich ändern. HRS 8600 CI...
Seite 67
Using multiple satellites via USALS Single Cable Distribution—Unicable Important Keys & Functions Channel List Search Channel in the list Favorite Change Channel Subtitles Audio Teletext Volume Mute Resolution Aspect Ratio Information TV Radio List of supported CAM module HRS 8600 CI...
Seite 68
Playback of recorded file USB Port Connecting USB storage Photo Specification of picture files Music Specification of music files Movies Specification of video files Record Manager Disk Manager Setup Settings Installation Channel Preference Setting Games Troubleshooting Specification HRS 8600 CI...
Make sure to align the dish to the satellite. Note: In ASTRA or other operators can you take the necessary positions and orientation for your location. With the angle and azimuth values Evaluation set up the dish. HRS 8600 CI...
Seite 70
We recommend, if you want to uses the recording or time shift function to employ a separate USB storage and copy never important data’s on it. Dolby Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. 1992-1997 Dolby Laboratories, Inc. All rights reserved. HRS 8600 CI...
Seite 71
Playback of supported video, audio and picture files from USB storage. No other use are not allowed. Notes: • CAM module and Pay-TV card are insert together into the Common Interface of the device. • CAM module and Pay-TV card are not part of the accessories. HRS 8600 CI...
Seite 72
Make sure to align the dish to the satellite. Note: In ASTRA or other operators can you take the necessary positions and orientation for your location. With the angle and azimuth values Evaluation set up the dish. HRS 8600 CI...
Every consumer is legally obliged to make these batteries with a collection of his church or in the trade so that they can be conveyed to an environmentally sound disposal. We discard used batteries for you free of charge and environmentally. Simply return them to us. HRS 8600 CI...
Notes Accessoires When opening the package of this settop box please make sure that the following accessories are included: • HRS 8600 CI • Remote Control • Batteries for the Remote Control • User Manual • International Warranty Card Notes: •...
SCART output TV Power Cord Loop Out Aerial output FBAS video output (CVBS) Stereo audio output (L/R) HDMI Output Digital audio output (coaxial) Note: Make sure when installing the antenna cable that the device is disconnected from the power. HRS 8600 CI...
In case of skin contact immediately wash the affected area. Please contact a medic after swallowing the battery or battery acid immediately Seek medical advice if battery acid has been swallowed. In case of contact with your eyes wash out the eyes and seek medical advice. HRS 8600 CI...
RED and GOTO button • GREEN and REPEAT button • YELLOW and Slow Motion button • BLUE and Bookmark Note: The same buttons on the remote control and the front panel have the same functions; either alternative shall work. HRS 8600 CI...
Installation Guide Connect a SCART or HDMI cable to the DVB-S receiver. Connect the aerial cable to the aerial input (LNB IN) of the HRS 8600 CI. Screw the plug to the input. Connect the SCART or HDMI cable to the TV set.
Seite 79
Stereo connection to a amplifier or soundsystem (Stereo) Connect the chinch cable to the red (R) and white (L) connectors of the HRS 8600 CI and to the connectors of the amplifier/sound system which is mostly labelled as “AUX IN” or “Stereo IN”. Switch on the amplifier / sound system and choose the appropriate input mode.
Common Interface The HRS 8600 CI allows one side to receive Free-to-Air TV programs such as e.g. ARD HD or ZDF HD and on the other hand receiving of Pay-TV e.g. ORF HD. The view of Free-to-Air are no longer required components, but the programming in HDTV limited.
Please format the USB-Sticks only with FAT 32 file system. Other file systems are not supported and can not recognizes by the USB port. Save all data’s from the USB memory before you connect to the device. HRS 8600 CI...
Before you install the switch on the unit, all necessary cable connections to the satellite dish and the TV. Use during initial installation, a SCART connection between HRS 8600 CI and your TV. During the initial start of the 8600 HRS CI appears on the TV screen, the setting - Installation menu. This...
The voltage can be changed manually. This directly influences the search results. Possible options are: OFF, 13V, 18V and 13/18V. If the option OFF is activated the LNB is not supplied with power any more which inflicts that no programs can be received any more. HRS 8600 CI...
Seite 84
If any programs are not found, then go to the option blank. With the 8600 HRS CI it is not possible to look at encrypted channels, you use for the "better" table in the station list, select only free channels. HRS 8600 CI...
Seite 85
First steps Channel Search After further search parameters were set, press the OK button and the search run begins. The receiving stations are displayed in the lists and stored after the search operation. HRS 8600 CI...
Seite 86
Use of multiple satellites via USALS (from page 28) Single Cable Distribution—Unicable (from page 29 Note: If you need to change the settings during the installation, the unit asks for the password. Now enter 0 0 0 0 and the access is allowed. HRS 8600 CI...
Seite 87
Press BLUE to start searching. A new menu appears asking for more parameters. After setting all parameters press OK for starting the search. The received programs are shown in the according lists and are saved when the search is finished. HRS 8600 CI...
Seite 88
All received TV and radio stations are displayed in the two lists. After the scan, the TV and radio stations in the two lists are stored and the unit goes into the live image of the first TV station. HRS 8600 CI...
TV and radio stations are displayed in the two lists. After the scan, the TV and radio stations in the two lists are stored and the unit goes into the live image of the first TV station. HRS 8600 CI...
Navigate with the arrow key DOWN to the Motor Setting option and press the OK button. You will now see a menu. Select “DiSEqC 1.2” with the DOWN arrow key. The menu is now expanded to the “DiSEqC 1.2” settings. HRS 8600 CI...
Seite 91
All received TV and radio stations are displayed in the two lists. After the scan, the TV and radio stations in the two lists are stored and the unit goes into the live image of the first TV station. HRS 8600 CI...
Seite 92
All received TV and radio stations are displayed in the two lists. After the scan, the TV and radio stations in the two lists are stored and the unit goes into the live image of the first TV station. HRS 8600 CI...
"IF Freq." and "Sat Position”. Select the option "IF Freq." with the DOWN arrow key. Activate the option with the OK button. Press again the OK button so you can edit other settings. HRS 8600 CI...
Seite 94
Press BLUE to start searching. A new menu appears asking for more parameters. After setting all parameters press OK for starting the search. The received programs are shown in the according lists and are saved when the search is finished. HRS 8600 CI...
(Yellow Button). If you see the desired channel in the filtered list, press the blue button and return to the channel list. Press changes in the desired channel, the OK button and the device with. HRS 8600 CI...
Functions Important keys and functions Filter the Channel list The HRS 8600 CI offers the possibility to filter the channel list. Press the BLUE button and the channel list will be added to the filter options. Using the buttons ▲ (CH +) / ▼ (CH) to select one of the options.
To increase or decrease the volume press the ◄/► button. Mute Press the MUTE button to switch off the volume. To un-mute, press again the MUTE button. Navigate in settings To navigate into setup setting please press ◄/►/▲/▼ buttons. HRS 8600 CI...
Pressing it twice shows the EPG information of the current program. Aside is information about satellites, transponders, frequencies of the TV programs and signal quality. Switch TV/Radio During the channel searching the device can also receive Radio channels. To switch from TV to Radio Channel, press the TV/RADIO button. HRS 8600 CI...
If you want to program the next show, then go first with the ◄ / ► buttons until the next show. Now press the GREEN button and the program information is copied into the timer (the reminder). Pressing the button changes the mode for recording. Pressing the button again and the timer programming switches off. HRS 8600 CI...
Seite 100
If you want to program the next show, then go first with the ◄ / ► buttons until the next show. Now press the GREEN button and the program information is copied into the timer (the reminder). Pressing the button changes the mode for recording. Pressing the button again and the timer programming switches off. HRS 8600 CI...
List of supported CAM Module Want to watch Pay-TV, then you need to HRS 8600 CI a CAM module with the appropriate subscription card. CAM the following modules are supported. Encryption System Module Conax SMIT Conax Conax Alphacrypt from MAS Com...
Connect to a recording, time-shifting or recording programming a USB storage to the USB port of the 8600 HRS CI. Please read the notes on page 6 regarding the USB port. The HRS 8600 CI supports NTFS, FAT 32 and FAT file systems. All others will be recognized. Use only USB memory brands.
Seite 103
Select the one program that should be deleted and press the GREEN button. Confirm the question with "Yes" and the program is deleted from the list. Delete All programming Press the RED button (below) on the remote control and confirm the question with "Yes". After that all programming will be deleted. HRS 8600 CI...
Seite 104
AD receiving and recording of subtitles / teletext are active. Recordings can also be taken over by the EPG window. Please edit the start time and duration of such a recording at the beginning and end with a few minutes buffer. HRS 8600 CI...
If you want to delete or rename the images, you must go to the Record manager of the Media Player. There you can: • Formatting • Deleting recordings • Rename pictures HRS 8600 CI...
The MENU button opens the Settings menu of the device and then you can, for example, the AV settings (e.g. resolution or aspect ratio) change, without interrupting the movie. The media player is terminated by the MEDIA button. HRS 8600 CI...
Media Player Photos If you want to display images with the HRS 8600 CI, connect a USB memory and go to the menu photo. Change the ▼ button in the file browser. Press the OK button and the data from the USB memory is read and displayed in the browser.
Music If you want to play music files with the HRS 8600 CI, connect a USB memory and go to the menu “Music”. Change the ▼ button in the file browser. Press the OK button and the data from the USB memory are read and displayed in the browser.
Seite 109
Up to 1411 128 to 320 8 to 48 Increase/Decrease volume To change the volume please press first the AUDIO button and than appears the volume bar on the screen. To change the volume, press now the ◄/► buttons. HRS 8600 CI...
Media Player Movies For playing movies with the HRS 8600 CI connect the USB media and enter the menu item Movies. Please note: The table shows the supported container, codec’s, maximal resolution, maximal bit rate and the to the codec related profils...
Seite 111
Movies If you want to play movies with the HRS 8600 CI, connect a USB memory and go to the menu “Movie”. Change the ▼ button in the file browser. Press the OK button and the data from the USB memory is read and displayed in the browser.
OK button on the "Yes" box. The recording is then deleted. Deleting all pictures Press the BLUE button on the remote control if you want to delete all recordings. Confirm the prompt by pressing the OK button on the "Yes" box. The images will be deleted. HRS 8600 CI...
First, connect the USB memory and press during the live image of the MEDIA button. Navigate with the arrow buttons ◄ / ► the categories until you reach the “Device Manager”. Change the ▼ button in the file browser. HRS 8600 CI...
Seite 114
Moving a file If you select a file and the destination directory and press the BLUE button, then the file is moved. Here in the source directory, the file is deleted and rewritten in the destination directory. HRS 8600 CI...
The installation menu is described between pages 18 and 28 in detail. Channel The Channel menu includes the sub-menu channel manager, favourites list and Channel setup. Channel Manager With the sub-menu you have the option to sort the stations found on your request or to edit. HRS 8600 CI...
Seite 116
If so, then confirm with the OK button • If not wait for a few seconds or press the EXIT button If you have consented to the security question, then the station will be immediately deleted from the list. HRS 8600 CI...
Seite 117
Favourites list. Press a button (1 to 8) and the selected station is stored in one of the eight favourites list. Channel Setting Here you can define as your personal starting channel. HRS 8600 CI...
Here you can set the subtitle language. Note: Many stations do not transmit subtitles. Hard Hearing You can adjust the subtitles for deaf or hard of hearing. Audio Language Here you can select the preferred audio language. HRS 8600 CI...
With this setting you can define the transitions in the slideshow. There are a variety of possible effects are possible. If you want to have no effects in the Slideshow, then disable this (option off). Otherwise, a random selection of the effects would be recommended (optional random). HRS 8600 CI...
Seite 120
This allows you to define whether the time-shift recording is to be stored permanently or not. Will always be stored in After exit from Time-Shift, the file is deleted Recommendation: Use the option off. Otherwise, the USB memory are quickly filled. HRS 8600 CI...
Password requests for certain options, such as for example Search. Change Pin Code Here you can change the default password of 0 0 0 0 to another four-digit number. Version Display version information such as software or hardware. HRS 8600 CI...
Seite 122
Lets you install a new software version on the device. This of course must be connected to a USB memory with only the update file in the root directory. Further information can be found in our download pages from www.Xoro.de. Important...
Seite 123
The Eco Design Directive 2009/125/EC, and Energy-using Products (EuP) called, aims to establish a framework for the setting of Eco Design requirements for energy-using products. That is, after 3 hours running time in DVB-S mode without pressing a button on the HRS 8600 CI automatically in the standby mode.
Seite 124
Recommendation: If you have not connected AV amplifier, please use the mute setting. Otherwise bit stream. Video output Select the setting you how to print the image on your TV. The options are CVBS (composite for, SCART), RGB (for SCART), HDMI (HDMI) and YUV (for component video output). HRS 8600 CI...
Seite 125
The HDMI 1.3 specification supports this standard, which requires, above all, a much higher bandwidth. The options are 8bit, 10bit and 12bit. Note: Make sure if you modify this setting to the appropriate support for your TV device. HRS 8600 CI...
Settings Games The HRS 8600 CI contains a number of games installed for the pastime. Please note each game, the operation guide. Playing Games by the Media-Player You also have the option to play 32 bit games by the Media-Player. Therefore, you must first download under www.native32.com/english the games/software.
Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Technical Support of Xoro/MAS: • Tel.: +49 40 77 11 09 17 • Fax: +49 77735515 • Internet: www.xoro.de/support.htm Symptom Correction No DVB-S reception / •...
Audio: Coaxial Cinch, Stereo Cinch Others: Common Interface (CI) for CAM module Device Weight: 0.80 Kg Dimensions: 270 x 160 x 43 mm Note: Weight and dimensions are not absolutely exact values. Specifications are subject to change HRS 8600 CI...
Seite 130
XORO by MAS Elektronik AG Pollhornbogen 19 21107 Hamburg Deutschland Tel: + 49(040) 77 11 09 17 Fax: + 49(040) 76 73 35 15 xoro@mas.de www.xoro.de...