Dish Setup-Explanation Of The Parameters - Xoro HRS 8588 Bedienungsanleitung

Dish Setup-explanation of the parameters

LNB Typ: define the oscillator frequency for your LNB . Please take the correct value from the-
manual of your LNB (standard:09750/10600)
If you have a Unicalbe/SCR EN50494, select LNB type Unicable (A oder B, A is generally the correct
choice by a Unicable system for satellite reception). Choose a free channel (IF channel) and the
corresponding frequency. Please refer to the manual of your Univable system. Ask your renter for the
free channel, if the connection is provided in the rental house.
LNB Voltage: This parameter defines the voltage of the antenna, this voltage decides signal from
horizontal or vertical polarized transponder will be received. The setting will only have to be
changed in very rare cases. A false setting will result in missing program or no signal reception
at all. (standard:13/18V)
22KHz: The receiver can switch the LNB with 22 KHz signals for the reception of another
frequency band. The setting will only have to be changed in very rare cases. A false setting will result
in missing program or no signal reception at all. (standard: Auto)
Toneburst: Tone burst switcher has two input ports, enabling the connection of 2 antennas or
LNB to the receiver. If you have a Tone burst switcher, you will have to select one of the both connec-
tions (A or B) for the satellite chosen on the left side.
DiSEqC: DiSEqC switcher has up to 16 input ports enabling the connection of multiple anten-
nas or LNB to the receiver. If you have a DiSEqC switcher, you will have to select one of connections
for the satellite chosen on the left side. Please check which version (1.0, 1.1) could be supported in
the manual of your switcher.
Motor: Rotatable Antennas require extended configurations. We recommend professional
installation from a technician. Please set up according to your antenna. You can open further set up
windows with the RED and the GREEN button.
After the set up has been done for all reachable satellites, please press the BLUE button to open the
menu for channel scan.
Initial Installation
HRS 8588
19