Inhaltsverzeichnis
Werbung
4.1 Powering On
1. Connect the power cord of the product to a wall outlet.
2. Power on by pressing the POWER button on the remote control or the POWER button at
the front of the product.
4.2 Manual Search
Manual
Search
Menu->Installation-> Manual Search
Press the VOL /VOL
prestored Transponder list, in this menu, you can
Search, Add, Edit, Delete transponders.
1. Start Search
In this menu, you can press the VOL /VOL
keys to choose the transponder which you want
to search, then press the Red key to search. You will be asked to confirm whether network
search or not. If you select "Yes", you will implement network search.
2. Add
You can add a new transponder with the Green key. Here you can input new Frequency,
Symbol Rate. Press OK to confirm the setting, now this new transponder is added to the
Transponder list.
3. Edit
You can edit a transponder with the Yellow key. Here you can input new Frequency and
Symbol Rate. Press OK to confirm the setting, now this new transponder will replace the
old transponder.
4.Delete
You can delete the transponder which you want with the Blue key. You will be asked to
allows
you
to
keys you can see the
ENG 6/14
configure
the
cable
setting
parameters.
Werbung
Inhaltsverzeichnis
