Pkm 9040/60B Z Bedienungsanleitung Seite 26

NOTICE! Only switch on the lights while the appliance is operating. Do
not switch on the lights to lighten the room.
1. After connecting the appliance to the power supply, the time of day should be
set. You can set the time when the appliance is not operating.
2. Touch the
ON
3. Touch and hold the
4. Use the
SPEED
/
LIGHT ON OFF
5. When the correct hour-digits appear on the LED display, touch and hold the
sensor until the minute-digits of the LED display flash.
TIMER
6. Use the
SPEED
/
LIGHT ON OFF
7. When the correct minute-digits appear on the LED display, touch the
sensor a third time to confirm the time of day.
1. When the hood is operating you can set a particular working time. You can
programme the timer from 5 to 60 minutes. The appliance will stop running
automatically when the programmed period of time has been elapsed.
2. To programme a working time touch the
will show "05.00".
3. Touch the
SPEED
To reduce the working time by one minute, touch the
4. Max. value: 59 minutes, min. value: 0 minutes.
5. When you have set the desired working-time, touch the
confirm the setting. The LED display will begin the countdown and show the
remaining working time.
6. When the desired time has been elapsed, the appliance will stop operating
automatically and the time of day will be displayed.
7. The next time you use the hood and touch the
automatically programme the working time you most recently set.
Setting the time of day
/ sensor once.
OFF
sensor until the hour digits of the LED display flash.
TIMER
sensor to increase the hour-digit displayed on the LED or the
sensor to decrease the hour-digit.
sensor to increase the minute-digit displayed on the LED or the
sensor to decrease the minute-digit.
The timer function
sensor repeatedly to increase the working time by one minute.
sensor once. The LED display
TIMER
LIGHT ON
sensor once, the timer will
TIMER
26
TIMER
/ sensor.
OFF
sensor once to
TIMER