Switching Off And Disconnecting The Appliance; Setting The Temperature; Super Cooling; Alarm - Siemens KI21RAD40 Gebrauchsanleitung

en Alarm
Switching off and
disconnecting the appliance
Switching off the appliance
Press the % button.
■
The appliance no longer cools.
Disconnecting the appliance
If you do not use the appliance for a
prolonged period:
Press the % button.
1.
The appliance no longer cools.
Pull out the mains plug or switch off
2.
the fuse.
Clean the appliance.
3.
Leave the appliance open.
4.

Setting the temperature

Recommended temperature
Refrigerator compartment:
Refrigerator compartment
Keep pressing the button –/+ until
■
the display indicates the required
temperature.
Sticker OK
(not all models)
You can use sticker OK to check
whether the temperature in the
refrigerator compartment reaches +4 °C
or lower.
If the sticker does not indicate OK,
gradually reduce temperature.
When the appliance is switched on, it
may take up to 12 hours until the set
temperature is reached.
Correct setting
24

Super cooling

Super cooling cools the refrigerator
compartment as cold as possible.
Switch on super cooling mode, e.g.:
before placing large quantities of
■
food in the compartment
for cooling drinks quickly
■
Note:
on, increased operating noises may
occur.
After 15 hours the appliance switches to
normal operation.
Switching Super cooling on/off:
Press the super button.
■
The button is lit when Super cooling
is switched on.
+4 °C
M

Alarm

Door alarm

A l a r m
The door alarm (continuous sound)
switches on if the appliance door is
open for longer than two minutes.
Close the door or press the alarm
■
button.
The warning signal is switched off.
When super cooling is switched