Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Procedure:
Step 1: Open the fuseholder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
DMX control channels:
DMX512 connection:
Sound-control:
Color-wheel:
Rotating gobo wheel:
Number of LEDs:
Type of LEDs:
Beam angle:
Maximum PAN-movement:
Maximum TILT-movement:
Length of base:
Width of yoke:
Height (head horizontal):
Weight (net):
Maximum ambient temperature T
Maximum housing temperature T
Min. distance from flammable surfaces:
Min. distance to lighted object:
Fuse:
Please note: Every information is subject to change without prior notice. 13.08.2012 ©
230 V AC, 50 Hz ~
170 W
12
3-pin XLR
via built-in microphone
7 colors and open
6 gobos and open
1
60 W
approx. 12°
585°
270°
280 mm
250 mm
320 mm
7.5 kg
:
45° C
a
(steady state):
55° C
B
0.5 m
0.1 m
F 2 A, 250 V
30/30
00054285, Version 1.3
Werbung
Inhaltsverzeichnis
