Control Board - EuroLite LED TMH-41 Hypno Bedienungsanleitung

Control Board

The Control Board offers several features: you can simply set the starting address or run the pre-
programmed program.
The main menu is accessed by pressing Menu until the display is lit. Browse through the menu by pressing
Up or Down. Press Enter in order to select the desired menu. You can change the selection by pressing Up
or Down. Press Enter in order to confirm. You can leave every mode by pressing Menu. The functions
provided are described in the following sections.
Default settings shaded.
Menu
Addr
Chnd
Shnd
Slnd
Lost
Sens
Angl
Pint
Tint
Padj
Tadj
Led
disp
Fhrs
Ver
Rest
defa
Sub menu
A001-A512 DMX address setting
12Ch
Setting DMX channel mode
23Ch
Sh1
Sh2 Internal programs
Sh3
Mast Master setting
SL1 Slave setting
Hold
Soun
If no DMX-signal one of these modes will run
Auto
Blac
S000~S099 Microphone sensitivity (increasing)
630
Select PAN-angle 630° or 540°
540
Yes
No
Reverse movement PAN/TILT
Yes
No
P000-P255
Calibrate PAN/TILT to their correct positions
T000-T255
Display turn off when the buttons are inactive
ON
ON - Display always on.
OFF
OFF - Shuts off the display after 40 seconds
ON
Display reverse 180 degree
OFF
Fixture running time
Software version
Reset
Restore factory settings
Function
33/36 00102616, Version 1.0