Setting Up; Headset Port; Default Outbound Call Mode; Connecting To The Gn1000 Rhl (Remote Handset Lifter) (Gn Accessory) - Jabra GN9350e Handbuch

2. Setting up

This section contains set-up and connection instructions for your headset's accessories and
optional functions.
Note: Your Guide for basic set-up and use contains the primary set-up and connection instructions.
GN9350e GN9330e

2.1 Headset port

If your telephone has a port for headset, it is recommended to leave the handset cord in the
telephone. Connect the telephone's headset port to the telephone port on the base. This will
enable you to use the call button on your telephone, if there is one, and will limit the number
of cords coming out of your base.
Important: The "clear dial tone switch" must be positioned correctly. See section: "Clear dial tone
adjustment" in the Quick Start Guide.
GN9350e GN9330e

2.2 Default Outbound Call mode

The base is default set for telephone use. If you want to use your VoIP application as default
calling media, press the USB
press the Telephone
GN9350e GN9330e
2.3 Connecting to the GN1000 RHL (Remote Handset Lifter)
(GN accessory)
You may purchase a GN1000 RHL as an accessory, which lets you answer and end telephone
calls while away from your desk. Please contact your vendor
or visit
www.jabra.com for further details.
To connect your GN1000:
1. Mount the GN1000 to your telephone as described in its
user manual.
2. Plug RHL's connection cord into headset base's AUX port.
The GN9350e enables you to use electronic hookswitch
(EHS) to answer and end calls while away from your desk.
Feature is described in section 2.5.2.
The remote answering and ending of calls is also available on
certain softphone/VoIP applications.
81-02622_RevB_GN9300e_UM_RBIII.indd 4
GN9330e USB
GN9330e USB
button for 5 seconds. If you want to change it back again,
button for 5 seconds
GN9330e USB
4
17-09-2008 13:35:21