4
OPERATING ELEMENTS & CONNECTIONS
Front panel
No.
Element
1
POWER switch
2
Infrared sensor for the remote
control
3
Display
4
Standby button
5
MUTE button
6
RDS button
7
AUTO SCAN button
8
STATION + and – buttons
9
TUNING/SCAN + and – buttons
10
Standby indicator
11
Station buttons 1-4, +5
12
MEMORY button
13
FM.ST button
14
AM/FM button
Rear panel
No.
Element
15
Antenna connections
Audio output
16
Power input
17
Function
Turns the unit on and off
Switches the unit to standby mode.
For muting the unit.
To indicate the additional information during RDS reception.
Starts the auto station memory.
For stepwise selection of the stored stations.
For station tuning
• long actuation: starts automatic station finding in forward or backward
direction
• short actuation: the received frequency is increased or reduced step by
step
Lights in standby mode.
For direct selection of the stored stations.
To store stations.
Switches the stereo function on and off.
Switches between AM and FM reception.
Function
Connection for an AM or FM antenna.
Stereo output (unbalanced RCA) for connecting an amplifier, a mixer or
other units with line level inputs.
Plug in the supplied power cable here.
15