Herunterladen Diese Seite drucken

Setting Memory; Selecting The Memory Type; Einstellungen Am Miniket Photo Vornehmen Speicher Einstellen; Memory Type (Speichertyp) Auswählen - Samsung VP- MS10R Bedienungsanleitung

Werbung

ENGLISH

Setting the Miniket Photo :

Setting Memory

Selecting the Memory Type

You can set the storage to the internal memory or mini SD card
(Optional Accessory).
1. Turn the Mode Dial to the
2. Press the [POWER] button to turn on the Miniket
Photo.
3. Select <Memory Type> by moving the joystick
left / right.
4. Select the desired option by moving the
joystick up / down and then press the joystick
(OK).
N <Int. Memory>: Photo, movie, music and voice
files are stored in the internal memory.
N <Memory Card>: Photo, movie, music and voice
files are stored in the external memory (mini SD
card).
5. After you finish setting, turn the Mode Dial to the desired
mode.
[ Notes ]
✤ If you insert a mini SD card when the Miniket Photo is on, the "pop-
up message" will prompt you automatically to select the storage
type except when in the Settings mode.
✤ If there is no mini SD card inserted, only the <Int. Memory> option
will be available.
✤ System requires a small portion of memory space, actual storage
capacity may differ from the printed memory capacity.
✤ The maximum recording time and image capacity is subject to
change depending on the media used (refer to page 31).
✤ You can set this option in Photo, Movie, Music, Voice, and Settings
modes using the MENU.
Settings
3
Settings
Settings
Settings
mode.
Memory Type
Memory Type
Memory Type
Int. Memory
Memory Card
Move
Move
4
Settings
Settings
Settings
Memory Type
Memory Type
Int. Memory
Memory Type
Memory Card
Move

Einstellungen am Miniket Photo

vornehmen : Speicher einstellen
Memory Type (Speichertyp) auswählen
Sie können den internen Speicher oder die Mini-SD-Karte (optionales
Zubehör) zum Speichern verwenden.
1. Stellen Sie den Moduswahlschalter auf den
TYPE
2. Drücken Sie die Taste [POWER], um den
3. Wählen Sie <Memory Type> (Speichertyp),
Move
Select
4. Wählen Sie die gewünschte Option aus, indem
Select
Select
TYPE
Move
Move
Select
Select
Select
5. Stellen Sie den Moduswahlschalter nach Beendigung der
Einstellung auf den gewünschten Modus.
[ Hinweise ]
✤ Wenn Sie die Mini-SD-Karte bei eingeschaltetem Miniket Photo
einsetzen und dieser sich nicht im Modus Settings (Einstell.)
befindet, werden Sie automatisch aufgefordert, den Speichertyp
auszuwählen.
✤ Wenn keine Mini-SD-Karte eingesetzt ist, steht nur die Option <Int.
Memory> (Int. Speicher) zur Verfügung.
✤ Da ein Teil des Speicherplatzes vom System selbst verwendet
wird, kann die tatsächliche Kapazität von dem auf der Karte
angegebenen Wert abweichen.
✤ Die maximale Aufnahmezeit und Fotokapazität variieren je nach
verwendetem Medium (siehe Seite 31).
✤ Diese Option kann in den Modi Photo (Foto), Movie (Video), Music
(Musik), Voice (Sprache) und Settings (Einstell.) mit der Taste
MENU eingestellt werden.
Modus
Settings
(Einstell.).
Miniket Photo einzuschalten.
indem Sie den Joystick nach links oder rechts
bewegen.
Sie den Joystick nach oben oder unten
bewegen, und drücken Sie dann den Joystick
(OK).
N <Int. Memory> (Int. Speicher): Bild-, Video-,
Musik- und Sprachdateien werden im internen
Speicher gespeichert.
N <Memory Card> (Speicherkarte): Bild-,
Video-, Musik- und Sprachdateien werden im
externen Speicher (Mini-SD-karte)
gespeichert.
DEUTSCH
37
37

Werbung

loading