Troubleshooting - AEG Voxtel D550BT Benutzerhandbuch

22
Enter the 4-digit system PIN (default 0000).
OK
Press to confirm, and the display will flash "PLEASE WAIT".
If the handset registration is successful, you will hear a confirmation
tone and the display will go to idle mode with the new handset
number shown. The handset will automatically be allocated the next
available handset number.
If the handset registration is unsuccessful, the display will return to
show "REGISTER HANDSET".
10.7 Reset your phone
You can reset your phone to the default settings . After a reset, all your
personal settings, call list entries and redial list entries will be deleted
but your phonebook remains unchanged.
OK
Press and / to select "RESET".
OK
Press to display "ENTER PIN".
Enter the 4-digit system PIN (default 0000).
OK
Press to display "CONFIRM?"
OK
Press to confirm, and the phone will be reset to its default
settings.
11

Troubleshooting

Problem
No dialling tone when
pressing
Causes
The connection cord
of the base station is
not plugged in.
The adapter
is not plugged in
correctly in the base
station.
Another handset is
using the base to
make a call.
Wrong telephone
line cord.
Solutions
Check
connections. Unplug
and plug back in the
cord mains. Check that the
telephone cord has
been plugged into
the base station and
the phone socket.
Check
station plug and the
230V plug (remove
and plug-in).
Wait until the line is
unoccupied.
the
the base