AEG Voxtel D550BT Benutzerhandbuch Seite 18

18
10.2 Date and time settings
If you subscribe to Caller Display the time and date settings will be
automatically updated by the network when you receive an incoming
call.
The Caller Display service only sends the month and date, not the
year, so you may need to set the year.
10.2.1 Change the date format
OK
Press and / to select "HS SETTINGS".
OK
Press and / to select "DATE AND TIME".
OK
Press to show "DATE FORMAT".
OK
Press and / to select your desired date format (DD-MM-
YY or MM-DD-YY).
OK
Press to confirm.
10.2.2 Change the time format
OK
Press and / to select "HS SETTINGS".
OK
Press and / to select "DATE AND TIME".
OK
Press and / to select "TIME FORMAT".
OK
Press and / to select your desired time format (12 HR or
24 HR).
OK
Press to confirm.
10.2.3 Set the time
OK
Press and / to select "HS SETTINGS".
OK
Press and / to select "DATE AND TIME".
OK
Press and / to select "SET TIME".
OK
Press and then enter the time information in 24 hour format.
OK
Press to confirm.
Note:
If a time was set previously, the current time is shown, otherwise
"HH:MM" is shown.
10.2.4 Set the date
OK
Press and / to select "HS SETTINGS".
OK
Press and t / o select "DATE AND TIME".
OK
Press and t / o select "SET DATE".
OK
Press and then enter the date information in the format set
in Section 10.1.1.