AEG Voxtel D550BT Benutzerhandbuch Seite 11

7.2 Bluetooth setup
To use a Bluetooth enabled mobile phone with your telephone, you
must first pair and connect your Bluetooth mobile phone with the
telephone base. Any handset registered to the base can be used to
make or answer calls on the mobile phone line.
7.2.1 Add a mobile phone
To pair and connect a Bluetooth enabled mobile phone:
Place your mobile phone near the base unit.
Press and then / to select "PAIR MOBILE".
Press and display will show "MOBILE READY?".
Press and display will show "DISCOVERABLE MODE". The
Bluetooth feature is activated.
Using your Bluetooth enabled mobile phone, turn on the Bluetooth
feature and search for a new device.
Once your Bluetooth enabled mobile phone has found the D550 BT
telephone, select it and continue the pairing process.
When the Bluetooth enabled mobile phone is successfully paired,
the screen will display "COMPLETED" with a tone and the icons
appear on the handset.
Refer to the user's manual of your Bluetooth enabled mobile phone to
learn how to search for or add new Bluetooth devices.
Notes:
>A paired mobile phone will be connected automatically and
stored.
>When a Bluetooth enabled mobile phone is successfully
connected, the
7.2.2 To answer a mobile phone call
If the paired mobile phone receives a call, the handset will ring with
the MOBILE RING tone and the display will show the
MOBILE
Press the
Press the key to end the call.
7.2.3 To redial the last Mmobile number
MOBILE
Press the
Press the key to dial the number over your mobile service and
initiate the call.
icon will be displayed on screen.
key to answer the call.
key to show "REDIAL LAST MOBILE NUMBER".
11
icon flashing.