Fohhn FP1pro Bedienungsanleitung Seite 24

(35) SKIP (skip titles / skip to the next title)
1. Skip titles
This function allows you to select a specific title.
Briefly press [Down] or [Up] (35) to select the previous or next
title.
- If either button is pressed during playback, the selected title
starts automatically.
- If either button is pressed when playback has stopped, the
title is selected but playback does not start automatically.
- If either button is pressed while playback is paused, the title
is selected and paused at the beginning.
F
• Skipping a title when a programmed sequence is active plays
the next title in the corresponding sequence.
• If random playback is active, you cannot use this function to
select the previous title.
2. Search
Press and hold the [Rev] or [Cue] buttons (35) for more than
0.7 seconds to search forwards or backwards within a title.
- If either button is pressed during playback, the title
continues playing automatically at the new position when
the button is released.
- If either button is pressed while playback is paused, press
the [Play/Pause] button (36) to continue playing the title at
the new position.
F
• Sound is muted during the search process (MP3).
(39) FOLDER SKIP (MP3 CDs and flash mode only)
Use this function to play songs from a specific folder.
Press the [Folder Skip] button (39) to select the previous or
next folder.
Press [Play/Pause] (36) to confirm your selection.
Press the [Down/Rev] and [Up/Cue] buttons (35) to navigate
within the folder.
F
• When all the titles in a folder have finished playing, the
device plays the titles in the next folder.
24 | FP1
EXTENDED FUNCTIONS (remote control required)
1. Direct selection
Press the numerical buttons (47) to select titles directly.
Press two numerical buttons in quick succession to select title
numbers 10 and above. Press the numerical buttons in a logical
sequence, i.e. 1 then 0 etc.
F
• Press the [Play] button (36) to confirm and play your direct
selection. The current title will continue to play until
confirmation is given.
2. Mute function
The [Mute] button (41) switches off the audio signal. Press the
button again to switch the signal back on.
3. Programming
Use this function to program a title sequence.
In CD mode (audio CD):
1. Press [Prog] (42) > Display MEM
2. Press [Down] and [Up] (35) to select the title
3. Repeat steps 1 and 2 to add more titles
4. Press [Play/Pause] (36) to confirm your selection and
start the programmed sequence
In flash mode and CD mode (MP3 CD):
1. Press [Prog] (42) > Display MEM
2. Press [Down] and [Up] (35) to select the folder
3. Press [Prog] (42)
4. Press [Down] and [Up] (35) to select the title
5. Repeat steps 1 to 4 to add more titles
6. Press [Play/Pause] (36) to confirm your selection and
start the programmed sequence
F
• Press [Stop] (34) to delete your programmed selection.
4. Album selection (MP3 CD and flash mode only)
This function allows you to change the current album.
1.Press [Find] (43) > the current album appears on the display
2.Press [Down] and [Up] (35) to select the album
3.Press [Play/Pause] (36) to confirm your selection and start the
album