Instruction; Safety + Environment; Precautions; Potential Risks - Fohhn FP1pro Bedienungsanleitung

1. Introduction
The EasyPort® is a high quality powered loudspeaker for a wide
range of applications. It allows you to set up a mobile or fixed
sound system quickly and easily. This professional design is easy
to use even if you are not familiar with the intricacies of sound
reinforcement. A clear control layout and rugged case make the
EasyPort® a user-friendly tool for every sound system application.
2. Safety

2.1 Precautions

1. This device has been manufactured and testet in accordance
with the German VDE safety guidelines for electronic
equipment. It has left the factory in perfectly safe condition.
In order to maintain safety and avoid risks of damage or
injury, take the usual precautions and follow all safety
instructions in the manual.
2. This device conforms to the German Class 1 safety standards.
When properly installed, all exposed metal parts are
permanently connected to safety ground. For safety reasons,
connect the equipment to a standard three-pin outlet
with protective ground only. Never open the safety ground
connection.
3. This device conforms to the EMC legislation currently in force
as certified by the CE mark on the device.
4. This device contains no user serviceable parts. To reduce the
risk of fire or electric shock, do not open the device and refer
servicing to qualified personnel.
5. Make sure to dispose of used batteries conforming to local
waste disposal rules. Never throw batteries into the fire (risk
of explosion).

2.2 Potential Risks

If the equipment
•
is visibly damaged;
•
contains loose parts;
•
does not operate correctly;
•
has been stored under adverse conditions (e.g., outdoors or in
a damp room) for extended periods of time; or
•
was exposed to high transportation stress (e.g., due to
inadequate packaging),
operating the equipment may be unsafe. Switch power to the
equipment off and mark the equipment.
Make sure the equipment cannot be connected to power or switched
on unintentionally by third persons.
20 | FP1

3. Unpacking

Your EasyPort® FP1 comprises the following components:
pro
1. FP1 selve powered loudspeaker
pro
2. AC adapter
Your EasyPort® FP1 and FP1
CD MP3
1. FP1 FP1 selve powered loudspeaker
CD / MP3
2.
AC adapter
3.
unscrewable stand adapter
Optional wireless microphone systems for EasyPort® FP1:
1.
Wireless receiver (will be installed in EasyPort® FP1)
2.
Handheld transmitter with microphone element, or bodypack
transmitter with lavalier or headset microphone
Please check that the package contains all components of the
system you ordered. If anything is missing, please contact your
Fohhn dealer immediately.

4. Description

4.1 General

FP1
The EasyPort® FP1 are self powered loudspeakers. A built-in 3
channel mixer with 2-band equalizer lets you connect a CD player
or similar audio source, one wired microphone, and the supplied
wireless microphone for simultaneous operation. A built-in radio
receiver is possible.
The FP1 is equipped with an integrated CD-player. The FP1
CD
equipped with an integrated MP3-player.
The EasyPort® is also available with a pre-installed wireless re -
ceiver that provides highly reliable and excellent audio quality. A
handheld or bodypack transmitter of your choice (optional) makes
the EasyPort® a self-contained sound system for use with hardwire
or wireless microphones.
For mains independent operation, the EasyPort® features a built-in
high quality, leakproof lead gel rechargeable battery that conforms
to the strict standards of the German Association of Casualty
Insurers.
The battery features much lower self-discharge and a better
capacity/volume ratio than nickel-cadmium batteries and has no
memory effect.
Battery capacity is 7.2 Ah for the FP1
comprises the following
MP3
.
is