Changing Default Settings; Beep Sound; Auto Power Save - Sharp MD-MT45H Bedienungsanleitung

Changing Default Settings

Whilst in the stop mode ...
1
With a MiniDisc inserted, press the MODE/CHRG
button for 2 seconds or more. "SET UP" will ap-
pear.
When you release the button, "BEEP ON" or "BEEP
OFF" will appear.
2
Press the or button to display the menu.
3
Press the MODE/CHRG button to switch items.
4
Press the /:OFF button.

„ Beep sound

You can eliminate the confirmation sound that beeps when
you press a button.
„ Auto play
You can make the unit not play automatically when you insert
a playback-only MiniDisc or an accidental erasure protected
MiniDisc.

„ Auto power save

When the unit is used in a place exposed to much vibration,
sound skipping can be decreased by cancelling the auto
power save function. (Battery will drain faster.)
What is auto power save function?
Auto power save function automatically adjusts the sound
skip memory storage to be from 5 to 10 seconds depending
on playback conditions, this saves battery power. If the Mini-
Disc unit is used in areas of much vibration, it may be neces-
sary to fix the sound skip memory to 10 seconds "Psave
OFF". This will improve performance under difficult condi-
tions but uses more power. (When the AC/car adaptor is
used the 10 second mode is always used.)
„ Digital recording level
"D.L MODE 1"
The digital recording level you set will be kept even after can-
celling recording.
"D.L MODE 2"
Every time you cancel recording, the level will return to [D.L
0dB].
ENGLISH
00/12/27 E_45SEEG_5.fm
E-28