Other Power Source; Charging The Rechargeable Battery - Sharp MD-MT45H Bedienungsanleitung

Other Power Source

If you purchase optional rechargeable battery (AD-N70BT)
and AC adaptor (AD-T20APH), you can use this unit.
Do not force the battery cover open too far.
To the DC IN
5V socket
To the wall
socket
AC 220-230V,
50/60 Hz
E-25
ENGLISH

„ Charging the rechargeable battery

When a separately available rechargeable battery is
used for the first time or when you use it after a long
period of disuse, be sure to charge it fully.
1
Insert the rechargeable battery.
A rechargeable battery other than the separately
1
available one (AD-N70BT) cannot be charged.
2
Plug the AC adaptor into the wall socket, and
2
then insert the plug on the other end into the DC
IN 5V socket.
3
Press the MODE/CHRG button.
" " will flash, and battery will begin charging.
z After the rechargeable battery is charged or used, it
will get slightly warm. This is normal.
z When the portable MD is turned on or operating, the
battery will not be charged.
„ About charging time
After about 3.5 hours have passed, "
go out. The battery charging is about 90%
complete.
To charge the battery fully, continue charging for about 2
more hours. In this case, you do not need to press the
MODE/CHRG button. Even if the MODE/CHRG button
is pressed, " " will not appear.
00/12/27
" will
E_45SEEG_4.fm