Changing Default Settings; Beep Sound; Auto Power Save - Sharp MD-MT88HSHAP Bedienungsanleitung

Changing Default Settings

Whilst in the stop mode ...
1
With a MiniDisc inserted, press the MODE/CHRG
button for 2 seconds or more. "SET UP" will ap-
pear.
When you release the button, "BEEP ON" or "BEEP
OFF" will appear.
2
Press the or button to display the menu.
3
Press the MODE/CHRG button to switch items.
4
Press the /:OFF button.

„ Beep sound

You can eliminate the confirmation sound that beeps when
you press a button.
„ Auto play
You can make the unit not play automatically when you insert
a playback-only MiniDisc or an accidental erasure protected
MiniDisc.

„ Auto power save

When the unit is used in a place exposed to much vibration,
sound skipping can be decreased by cancelling the auto
power save function. (Battery will drain faster.)
What is auto power save function?
During playback, maximum 40 seconds (in stereo) of
musical information is stored. Auto power save function
automatically adjusts the storage time between 5 and 40
seconds to reduce the power consumption. If this func-
tion is cancelled, the storage time cannot be adjusted. (It
cannot be adjusted even if it is operated on the battery
charger.) The storage time varies depending on the play-
back mode.
„ Digital recording level
"D.L MODE 1"
The digital recording level you set will be kept even after can-
celling recording.
"D.L MODE 2"
Every time you cancel recording, the level will return to [D.L
0dB].
E-32
ENGLISH