Volume Control; Bass Control - Sharp MD-MT45H Bedienungsanleitung

1
Insert the earphones plug into the PHONES
socket.
2
Insert a MiniDisc (page 6).
3
Press the PLAY/PAUSE button.
Playback starts automatically with a playback only
MiniDisc or a MiniDisc which is protected against
accidental erasure (Auto-play function).
To interrupt playback
Press the PLAY/PAUSE button.
To resume playback, press the PLAY/PAUSE button
again.
To stop playback
Press the /:OFF button.
If the unit is not operated for at least 2 minutes whilst in
the stop mode, the power will shut off automatically.
To turn off the power
Press the /:OFF button whilst in the stop mode.

„ Volume control

Press the VOL+ button to increase the volume and the
VOL - -- button to decrease the volume.

„ Bass control

Each time the BASS button is pressed, the tone will be
switched as follows.
BASS 1 Emphasised slightly.
BASS 2 Emphasised more.
BASS 3 Emphasised fully.
BASS OFF Cancelled.
Notes:
z Reduce the volume before starting to play. MiniDiscs,
compared to ordinary cassette tapes, have very little
noise. If the volume is adjusted according to your
usual expectations of noise, high volume may damage
your hearing.
z
The sound escaping from your earphones may annoy
people around you. In particularly crowded places
(such as on trains or buses), reduce the volume.
ENGLISH
00/12/27 E_45SEEG_3.fm
E-12