AEG S83600CSM1 Benutzerinformation Seite 17

To carry out the following opera-
tions, we suggest that this be
made with another person that
will keep a firm hold on the
doors of the appliance during
the operations.
1.
m1
m5
m3
Open the doors. Unscrew the mid-
dle hinge (m2). Remove the plastic
spacer (m1).
2. Remove the spacer (m6) and move
to the other side of the hinge pivot
(m5).
3. Remove the doors.
4. Remove the left-hand cover pin of
the middle hinge (m3,m4) and move
to the other side.
5. Fit the pin of the middle hinge (m5)
into the left-hand hole of the lower
door.
6.
m2
m6
m4
b1
b2
b3
Remove using a tool the cover (b1).
Unscrew the lower hinge pivot (b2)
and the spacer (b3) and place them
on the opposite side.
7. Re-insert the cover (b1) on the oppo-
site side.
8.
h1 h2
Remove the handle. Unscrew the
top handle bracket from the handle
rod (h1). Unscrew the bottom handle
bracket from the door (h2)
Unscrew the top handle bracket
from the door (h3).
9.
h4 h5
Install the handle in the opposite
side.
Re-screw the handle bracket on the
door (h4). Turn the handle bracket
with the handle and screw them to
the door (h5) and the fitted handle
bracket (h6).
10. Remove using a tool the cover. (c1).
11. Unscrew the upper hinge pivot (c2)
and place it on the opposite side.
ENGLISH
17
h3
h6