Satellite Searching And Fixing The Antenna - SELFSAT IP series Bedienungsanleitung

Note
SELFSAT>IP series Antenna has its own MAC Address.
The MAC address can be found from the backside of the included manual.
Note
Network environment setup:
Because digital video transmission requires stable and fast enough networking
(LAN/WLAN) environment, the SAT>IP technology used in SELFSAT>IP series product
need stable and powerful WiFi router in order to perform well in WiFi environment for
multiple user to use at the same time. SELFSAT>IP series is recommended to be used with
802.11ac or above grade WiFi router to have good user experience.
If you use lower version than 802.11ac router, SELFSAT>IP series might not perform the
optimum operation.
After customer obtains a 802.11ac router, we also recommend customer to try the two
different 2.4G and 5G signal (SSID) from the router and see which SSID provide smoother
connection and stays with the better one. Then under this configuration, the user can
enjoy the best performance of SELFSAT>IP series through WiFi.

3) Satellite Searching and Fixing the Antenna

Once all connected, turn on the TV and the Satellite receiver.
Select the Antenna Pointing Menu on your set top box.
You can check signal level on your TV.
Ensure that to choose "LNB : ON"
You will need someone to stay in front of the TV to tell you when the signal is "good" while you're
outside trying to adjust the antenna the best way possible.
The signal level and quality is indicated on the TV screen and will fluctuate and change color according
to the adjustment & movement of the antenna while you are pointing & finding (azimuth, elevation
angle).
The level indicates the power of the signal and the color is the signal reception quality from the chosen
satellite.
Antenna Pointing Menu
Signal:
10
Satellite : ASTRA 1
Transponder : 23
LNB : ON
Frequency : 12640
0