A) How To Prepare The Cable; B) How To Connect The Cable To The Antenna And The Set Top Box; Step 5: Fine Tuning And Fix The Bracket - SELFSAT -H30D Serie Bedienungsanleitung

A) How to prepare the cable?

15mm
8mm
3mm

Step 5: Fine Tuning and Fix the Bracket

Once fine tuning is completed for signal reception, please tighten bolt and nut.
Once all connected, turn on the TV and the Satellite receiver.
Select the Antenna Pointing Menu on your set top box.
You can check signal level on your TV.
Do not forget to choose "LNB : ON"
You will need someone to stay in front of the TV to tell you when the signal is "good" while you're outside
trying to adjust the antenna the best way possible.
The signal level and quality is indicated on the TV screen and will fluctuate and change colour according to
the adjustment & movement of the antenna while you are pointing & finding (azimuth, elevation angle).
The level indicates the power of the signal and the colour is the signal reception quality from the chosen
satellite.
Antenna Pointing Menu
Satelite : ASTRA 1
Transponder : 23
LNB : ON
Frequency : 12640
Signal:
B) How to connect the cable to the antenna and
the set top box?
One side
To Antenna
CONNECTOR COVER
Cable
F CONNECTOR
It is important that the coaxial cable does not become damaged or kinked
during the installation procedure.
0
Other side
To receiver
7