A/V Output Setting - Octagon SF 908G HD - Difference Bedienungsanleitung


Subtitle Language : Select the default language for subtitle when changing service.
 Teletext Language : Select the default language for Teletext.
 User Font file : Select a font you want to use.
NOTE : To show and use the User Font, please install a desired font file(*.ttf) to the
/Var/Font directory(folder) in your PC which is connected with your receiver(STB)
by network. Then press LEFT/RIGHT button to select a font and press OK button.

2.6 A/V Output Setting

 TV Type : Select the TV types.(PAL/NTSC/Auto) In Auto mode, the STB is automatically selected to
NTSC or PAL accordingly to the service played.

TV Aspect Ratio : Select the aspect ratio of TV which is
connected to the STB (4:3/16:9). This menu must be set prior
to selecting the Display Format function.
 Display Resolution : Select the Display Resolution of the
screen by using ARROW or OK button. You can also change
the resolution with Resolution button in the remote. Each
time you press the Resolution button, the resolution changes
in the following sequence: 576i > 576p > 720p > 1080i >
1080p.
NOTE : Please note that your TV may not show a picture depending on the Display Resolution set by
your STB as well as if set to PAL when NTSC is required or vice versa. If you set the Display
Resolution as HD(more than 576p), your TV cannot display anything when the TV is
connected to the Composite Video output of the STB. In case of HDMI, your TV can display a
picture for all of the resolution settings of the STB. But it is also possible that your TV may not
display a picture with 576i, because some HDTV's does not support 576i.
 Display Format : In case of a 4:3 ratio TV set, you can select Letter Box or Pan&Scan. In case of a 16:9
ratio TV set, you can select Pillar Box or Full Screen. In case of a 14:9, 16:10 ratio TV set, you can select
Pillar Box , Pan&Scan or Full Screen.
HDMI Dolby Digital : Set the Dolby Digital mode 'On' or 'Off' in status of HDMI output.

Dolby Digital Default : Set the Dolby Digital Default mode 'On' or 'Off'. If you set 'On', Dolby Audio

will play on the service that support Dolby Audio.
Sound Mode : Set the audio mode output among the RCA jack, HDMI (Stereo/Mono/Left/Right).

 Power Saving in Standby Mode : You can select the Power Saving in standby Mode.
 Audio Sync Delay : To adjust Audio Sync. You can adjust from 0ms to 400ms.
38