Data Transfer; Configuration; Recording Option - Octagon SF 908G HD - Difference Bedienungsanleitung

1.4 Data Transfer

 Transfer all System data to USB storage : If you want to
transfer and use BOTH of the current system parameters and
service data in the future, this menu will allow you to store all
data to your USB device. Press OK button to store all current
data to an external USB storage.
 Transfer Service data to USB storage : If you want to transfer
and use ONLY the service data in the future, this menu allows
you to store current service data. Press the OK button to store
the current service data to your external USB storage. The
service data can also be viewed and edited on a PC with an
appropriate editor (DrEdit) for the file saved.
 Data download from USB storage device : This menu allows you to download the saved data from
the external USB storage to your STB. Press OK button to download data.
NOTE : If no USB device is connected USB slots, then a Menu item will not be available.

2. Configuration

2.1 Recording Option

Alarm Confirm Message : Turn 'ON' this Alarm message to

indicate and show the alert pop-up message when there is a
reserved recording event. The alert message will show 3
minutes before the starting time of the reserved recording
event.
 Recording Stop Message :
- Set 'On' : When you press the STOP button while recording,
then a confirmation window is displayed.
- Set 'Off' : When you press the STOP button while recording,
the STB will stop the recording process immediately /
instantly without asking the additional confirmation from the user.
 Extra Recording Time Before(Start) & After(Finish) :
- You can add an extra recording time before start / after finish (1min /2min /3min /4min /5min/
10min/ 15min/ off) to scheduled recording events. If you set an extra recording time by using the
ARROW and OK buttons, the scheduled recording event will have a 'Start' / 'Finish' time of
additional recording time added to the basic event. This option only works for real time events.
But, when you schedule a service recording in the Timer Settings menu, this option has no affect.
 TimeShift Start : You can choose the method of TimeShift function.
- Auto : TimeShift function is automatically activated.
- Off : TimeShift function will be disabled.
- Manual : TimeShift will be activated when the Pause key is pressed.
TimeShift Duration : You can adjust TimeShift duration in 30 minute intervals. (Off /30min /60min

/90min /120min). This duration defines the maximum time length of the TimeShift as long as the
storage device has enough memory space left.
 Playback Position Jump : When you use LEFT/RIGHT ARROW button to move back/forward through
the recorded time bar, You can select the time intervals. (10 Sec / 30 Sec / 1Min / 2 Min / 4 Min / 10
Min / Auto).
35