SUNTEC KLIMATRONIC Fusion CleanAir 10.500+ Bedienungsanleitung Seite 21

Please take out the SUNTEC H13-HIGH-PERFORMANCE-COMBO-FILTER and insert the active
carbon filter. Connect the exhaust hose and the hose connector to the FUSION CleanAir unit as
displayed in the illustration;
Place the FUSION CleanAir unit in the shade if possible and in a cool place in order to increase
efficiency and to avoid overheating. At an ambient temperature of over 35°C, the FUSION CleanAir unit
may deactivate. If this occurs continuously, we recommend you temporarily use the INDOOR
OPERATION of the FUSION CleanAir unit.
Set the function to „COOLING". The settable temperature range is between 16°C and 31°C. This can be
set using the temperature control.
The air with high oxygen content cooled by the FUSION CleanAirunit is led into the room via the
exhaust hose. This can be executed e.g. via a tilted window, a door or wall aperture. Make sure that no
warm outside air can enter the room. For effective cooling, we recommend our selection of various
accessories, for example Window kit (incl. in the package) which reduce or prevent entry of warm air
into the room, or via the remote control.
Control panel
On/Off
1
Temperature -
2
3 Sleep mode
4 Fan speed setting
5 Temperature +
6 Timer
7 Mode setting
8 Low fan speed indicator
9 Sleep mode indicator
10 Timer indicator
11 Cooling mode indicator
12 LED display
13 Dehumidifying mode indicator
14 Fan mode indicator
15 "Water tank full" indicator
16 Medium fan speed indicator
17 High fan speed indicator
18 Heating mode indicator
19 Fresh mode indicator
21