Lamp Mounting - Merkur TYPHOON Betriebsanleitung

Air Hockey TYPHOON

Lamp mounting

Take out the 8 screws to remove both display unitsfrom the top lamp.
Use the allen screws (M8 x 40) to mount the four rods to the Typhoon table.
Place the top lamp onto the four rods, carefully. Thereby secure the top lamp with the
4 allen screws (M6 x 10).
Be sure that the harness is connected, before replacing both display units to the top lamp.
Finally, fi x the top lamp together with the rods in position using the Spax screws.
8