Mounting, Installation; Mounting The Feet; Installation Of The Lamp - Merkur TYPHOON Betriebsanleitung

Air Hockey TYPHOON

Mounting, installation

Mounting the feet

• The table is positioned on its side with the coin
door facing upward. A stable position must be
ensured!
• The upper half (1) of the foot is fastened with
screws.
• The lower half (2) of the foot is inserted into
the upper half (1) and fastened with screws.
• The threaded cup feet (3) are attached.
The remaining feet are attached in the same
manner.
• After installation of the feet has been comple-
ted, the playing surface is fi nely levelled by
means of the adjustable cup feet.

Installation of the lamp

The de luxe versions are supplied with a supple-
mentary lamp for the playing surface. This fi xture
must be installed before starting operation! The
necessary cable connections and holes have al-
ready been provided in advance at the factory.
• The tubular frame without cable is fastened
with screws on the side opposite the coin door.
• The tubular frame with cable is fastened with
screws on the side with the coin door.
!
Both cable connections must fi rst be attached!
• The lamp is installed, and the cable is con-
nected.
No further wiring is necessary within the unit.
7