Coinage Setting; Resetting Of The Coin Value; Setting Of Value Per Game - Merkur TYPHOON Betriebsanleitung

Air Hockey TYPHOON

Coinage setting

A
set value
I
A
0I
number of DIP-switch

Resetting of the coin value

Channel 1 (DIP switch)
• The coin door is opened.
• The service switch is set to midposition.
• DIP switches 1 and 8 are set to ON.
• The "start" push-button is held depressed.
• The service switch is pulled while the push-
button is held depressed.
• The "start" push-button is released.
• The memory location (DIP switch 1) is in-
dicated on the "Games" display, and the
associated value is indicated on the "Playing
time" display.
• The desired coin value is set by pressing a
key.
The setting is stored in memory by inserting a
coin in correspondence with the value set for
channel 1 of the coin validator. The value must
be indicated on the coin validator.
The game price is determined by the values set
on DIP switches 1 and 4 (see table).

Setting of value per game

(DIP switch 4)
If the electronic coin validator is programmed
for all three coin channels, the set "va-
lue per game" applies to all channels.
• The coin door is opened.
• The service switch is reset to midposition.
• DIP switches 4 and 8 are set to ON.
• The "start" push-button is held depressed.
• The service switch is pulled while the push-
button is held depressed.
• The "start" push-button is released.
• The memory location (DIP switch 4) is indica-
ted on the "Games" display, and the associa-
ted value is indicated on the "Playing time"
display.
• The desired coin value is set by pressing a
key.
• The setting is stored in memory by inserting
a coin in correspondence with the value set
for channel 1 of the coin validator.
If the electronic coin validator has been prepa-
red for all three coin channels, the programming
for the other channels proceeds in the same
order.
15