Replacement Headshell; Technical Specifications - Omnitronic DRT-1000 Bedienungsanleitung

9.2 Replacement headshell

A replacement headshell (e. g. the headshell S-15 from OMNITRONIC) including a phono cartridge system
allows an immediate replacement, if required. The headshell can easily be replaced by unscrewing the
existing one and screwing on the new one. After the replacement readjust the stylus pressure and the anti-
skating value (chapters 5.3 and 5.4).

10. TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Type:
Drive method:
Motor:
Platter:
Speed:
Change time between speeds:
Start time:
Stop time:
Wow and flutter:
Tone arm:
Anti-skating range:
Stylus pressure range:
Applicable cartridge weight:
Output connectors:
Available data carriers:
Recording format:
Dimensions:
Weight:
Please note: Every information is subject to change without prior notice. 11.08.2009 ©
80 - 260 V AC, 50/60 Hz ~
8 W
manual turntable
belt drive
DC motor
Ø 330 mm, aluminum diecast
33 1/3 RPM, 45 RPM, and 78 RPM
<1 sec
<1 sec
<1 sec
<0.2 % WRMS
S-shape with Cardan's suspension
0 - 4 g
3 - 4 g
6 - 10 g
stereo RCA with line level
USB devices and SD(HC) cards
MP3 with 128 kbit/s and 44.1 kHz sampling rate
485 x 370 x 140 mm
4 kg
23/23 00048594.DOC, Version 1.0