Mounting The Target Light; Connections; Operation; Playing A Record - Omnitronic DRT-1000 Bedienungsanleitung

5.5 Mounting the target light

Take the target light out of one of the two lateral polystyrene wrappings and plug it into the corresponding
RCA jack (Fig. 9). The target light activates automatically when switching on the power. Adjust the light freely
in a range of 360°. Caution! Never connect any other plugs, e.g. mixer inputs etc. to this jack! Otherwise,
danger of heavy equipment damage.
20/23 00048594.DOC, Version 1.0