Clint F3 Bedienungsanleitung Seite 9

Use the / buttons to choose the preset number from 1-10 you
wish to use. Then press the ENTER button to store.
2 Recalling a stored station
Once you have saved a station to one of the preset buttons, you can
recall by pressing the PRESET button. Then use the / buttons to
select the desired preset station. Once selected press the ENTER
button to activate.
If you choose a preset that has not been allocated a station, then
"Preset Empty" will be displayed.
Alternatively you can use the preset buttons, press one of the buttons
to use the first digit preset ie:- 1-6 will be 1. To use the preset 6 press
and hold the 1-6 button.
3 Display modes
Every time you press the "INFO/MENU" button, the display will cycle
through the following display modes: The information is displayed on
the lower segment of the LCD display.
DLS (scrolling text) Signal Error
Signal Strength Bitrate
Programme Type Time
Ensemble Name Date
Channel Frequency
www.clintdigital.com
9