Clint F3 Bedienungsanleitung Seite 14

5. To see what stations are present in the found ensemble/multiplex,
just press either or buttons. When you've located a station that
you would like to listen to, just press the ENTER button.
6. Once you have reached the last station in the found ensemble, it
will revert back to the first station again. If you wish to exit the
manual tuning mode, just press the ENTER button.
11 Pruning
When the radio has performed a Scan in several locations you may
find there are stored stations that you can no longer receive. This
function automatically removes them from the stored station list.
1. Press and hold the INFO/MENU button for 3 seconds.
2. When the < Autoscan > option appears press either
ENTER button.
3. Use the or
select.
12 DRC ( Dynamic Range Control )
This causes the radio to reduce the dynamic range of the audio signal.
The purpose of this is to adapt the dynamic range of the audio signal
to listening in a noisy environment.
NOTE: this is not available on many DAB stations.
1. Press and hold the INFO/MENU button for 3 seconds.
2. When the < Autoscan> option appears press either
ENTER button.
3. Choose between DRC off, DRC High and DRC Low.
14
buttons to select YES or NO and press ENTER to
www.clintdigital.com
or the
or the