Clint F3 Bedienungsanleitung Seite 18

3. Use the or
4. Choose <Yes> and press the ENTER button.
GENERAL OPERATION
Backlight
To set the backlight for this unit.
1. Press and hold the INFO/MENU button for 3 seconds.
2. When the <Scan Setting> option appears press either
find <System>, press the ENTER button.
3. Use the or
<Time Out>.
4. Press the ENTER button and choose the available time <Off>,
<10 sec>, <20 sec>, <30 sec>, <45 sec>, <60 sec>, <90 sec>,
<120 sec>, <180 sec>.
Sleep Timer
When listening to the radio you can set a period of time before the
radio enters standby mode.
NOTE: The radio must be active and not in standby mode already.
1. To activate the timer press the SLEEP button once to open the
option screen.
18
to find the <Factory Reset> option and press ENTER.
to find the <backlight> opinion, then find
www.clintdigital.com
or and