Clint F3 Bedienungsanleitung Seite 20

TROUBLESHOOTING
PROBLEM
No Sound
Static Sound
Sound is distorted
Desired station not found
The display shows
"SERVICES N/A"
The display is blank
I can hear a burbling noise
on some stations.
20
CAUSE
Volume not turned up
Signal reception too low
Volume is too high
Weak signal
No DAB coverage in your area
Poor reception
This may occur if the
broadcaster changes the
label of a service or removes
a label while tuned
Battery power is low
Weak signal
www.clintdigital.com
SOLUTION
Adjust the main volume knob
Adjust the antenna or move
the unit to a stronger signal
location
Use the Manual Tune function
Adjust the position of the
aerial
The radio will try to retune
perform a scan
Insert some new batteries
Use mains power
try re-positioning the aerial