Clint F3 Bedienungsanleitung Seite 11

<Set 12/24 Hour>: Use the / buttons to select 12 or 24 hour and
then press the ENTER button to activate.
<Set Time/Date>: When activated and the Hour digit flashes, use the
/ buttons to set the digit to the correct hour then press ENTER,
repeat for the minutes again pressing ENTER when set. The process
for setting the date is exactly the same as the above. Press ENTER to
finalize the setting once complete.
<Auto Update>: Use the / buttons to cycle through the various
options for auto setting the time & date. These range from: <Update
from any>, < Update from DAB>, < Update from FM> and <No Update>.
<Set Date Format>: Use the / buttons to cycle through the various
options for setting the format of date. There are <DD-MM-YYYY>,
<MM-DD-YYYY>.
NOTE: When the power is switched OFF ( not standby ) the settings
will be lost.
8 Alarm Setting
1. Press and hold the INFO/MENU button for 3 seconds.
2. When the <Autoscan> option appears press either
<System>.
3. Press the ENTER button, use the / to find <Alarm> and press
ENTER.
Alarm Setup
Press the ENTER button to initiate the setup process.
1. Use the / buttons to select Alarm ON or OFF then press ENTER
to activate.
www.clintdigital.com
or and find
11