Connections Of The Monitor Panel; Supply Voltage Connection; Usb In (Upstream) - Lenze MP1000 Anleitung

3.3

Connections of the monitor panel

Illustration 6 Connection side of the MP series
Video input
USB input
USB output
24V DC supply voltage
3.3.1

Supply voltage connection

The computer is connected to 24 V DC via a 3-pole "Phönix-Combicon" connector. The connector
required is contained in the scope of supply of the device.
The connection has the following pin assignment:
The PE input is connected to GND and to the housing.
3.3.2

USB in (upstream)

Via the USB port (type B) the connection to the computer is established.
The connector has the following pin assignment:
PIN
1
2
3
4
38
DVI-D
(screen connection to the computer)
1x USB-B, upstream
(connection to the computer)
2x USB-A, downstream
(for the connection of USB devices)
Phoenix COMBICON, model MSTB 2.5/3-ST-5.08
Signal
+5V
-Data
+Data
GND