Preparing For The Installation - Megasat Caravanman 85 Bedienungsanleitung

Caravanman 85

Preparing for the installation

Preparing for the installation Preparing for the installation Preparing for the installation
Install Tools and Materials
The antenna system is designed for simple installation and setup. However, the
following list of equipment or items should be available during installation of the
antenna.
■ Electric drill and drill bits
■ Socket wrench
■ Silicon sealant
■ Fastener suitable for specific application
1. Verification of the Vessel's Power Supply.
■ Confirm that the vessel's power supply is 12VDC.
2. Verification of the Satellite Receiver and IDU's attachment and the electricity
supply
■ Attach Satellite Receiver and IDU in the interior of the vessel or the trunk.
■ Connect the power of Satellite Receiver and IDU.
■ Once the power of Satellite Receiver and IDU is verified, it confirms that both
Satellite Receiver and IDU are working normally.
3. Procedure of the satellite's attachment and installation.
■ Attach the satellite on the flat surface area of the vessel's roof.
■ Connect each end of the Coaxial antenna cable to the satellite's terminal and the
IDU.
■ Connect the IDU and the Satellite Receiver box together through the coaxial
cable.
■ Make sure that the satellite is working normally, once the power is supplied.
Warning : Things to consider when installing the antenna.
MEGASAT
■ Turn off the power when attaching or detaching the antenna.
■ Make sure that the attached satellite is fixed on the flat surface.
■ When attaching, ensure that all the products are adhered properly.
■ Ensure that all the cables are connected properly.
- 1 – 45
Benutzerhandbuch Dez. 2011Version 1.0
www.megasat.tv