Philips HI 515 Gebrauchsanweisung Seite 5

General description
A
Temperature control (rotate)
B
Steam control (slide)
O = no steam
1 = minimum steam output
6 = maximum steam output
C
Spray button T (press)
D
Spray nozzle
E
Shot of Steam button
F
Turbo Steam button
G
Filling funnel for filling with water without spillage
H
Temperature pilot light (amber)
I
"Self clean" button (press)
J
Water window
K
Cord storage
L
Type plate
M
Measuring beaker
N
"Soft touch" hand grip (types HI 525/28/29/35/45)
O
"Auto Stop" pilot light (red) (type HI 545)
Filling with water
• Please fill this iron with normal tap water before using for the first time.
• For refilling, you can also use tapwater. However, if the water is very
hard (hardness higher than 17 °DH / 21
use distilled water.
- Remove the mains plug from the wall socket before filling the iron.
Set the steam control (B) to position O (= no steam).
- Stand the iron on its end and open the filling funnel (fig. 2).
- Pour water (max. 250 ml) into the filling aperture (fig. 3).
Use the measuring beaker with spout for this purpose.
- Close the filling funnel (fig. 4).
Ironing temperature
• Always check first to see whether a label with ironing instructions is
attached to the article to be ironed. (See table.)
Follow these ironing instructions in all cases.
(fig. 1)
9
(press)
0
(press) (types HI 525/28/29/35/45)
(for steam-ironing and spraying)
1 ⁄ °Clarke), it is advisable to
4
5