Selecting The Display Color (Only For Kd-Sc800R); Changing The Standard Plate (Only For Kd-Sc800R) - JVC KD-SC800R Bedienungsanleitung

Selecting the display color
This section is only for KD-SC800R.
You can select the color of the display according
to your preference.
When shipped from the factory, "ALL DEMO" is
selected.
1
Press and hold DISP (display) for a
while.
2
Select the setting or color you want.
ALL DEMO O SOURCE O BLUE O
OCEAN O PURPLE O PINK O
ROSE O RED O (back to the beginning)
• When "ALL DEMO" is selected:
The display color changes every 6 seconds.
(rose = pink = ocean = red = purple
= blue = back to the beginning)
• When "SOURCE" is selected:
The display color is fixed to red while
listening to FM or AM, and to blue while
listening to CD.
3
Finish the setting.
Note:
If no operation is done for about 15 seconds or if any
other button is pressed, the setting is also finished.
24
The last selected setting
appears on the display.
Each time you press the
button, the selection
changes as follows:
Changing the standard plate
This section is only for KD-SC800R.
You can change the standard plate with another
plate supplied with your unit.
You can also download them by visiting
<http://www.jvc.co.jp/jvccar>.
• When changing the plate, be careful not to
leave your fingerprints on the plate or cover.
1
Loosen the screws with the supplied
hex screwdriver.
2
Remove the plate cover and the
standard plate.
Standard plate
Plate cover