Safety Information - Epson AcuLaser CX37 Series Handbuch

❏ Wait at least one hour before using an imaging cartridge after moving it from a cool to a warm
environment to prevent damage from condensation.
❏ To get the best print quality, do not store the imaging cartridge in an area subject to direct sunlight,
dust, salty air, or corrosive gases (such as ammonia). Avoid locations subject to extreme or rapid
changes in temperature or humidity.
❏ When removing the imaging cartridge, do not expose it to sunlight at all and avoid exposing it to
room light for more than five minutes. The imaging cartridge contains a light-sensitive drum.
Exposure to light can damage the drum, causing dark or light areas to appear on the printed page
and reducing the service life of the drum. If you need to keep the imaging cartridge out of the
printer for long periods, cover it with an opaque cloth.
❏ Be careful not to scratch the surface of the drum. When you remove the imaging cartridge from the
printer, always place it on a clean, smooth surface. Avoid touching the drum, since oil from your
skin can permanently damage its surface and affect print quality.
❏ Do not let the paper's edge slide across your skin because the edge of the paper may cut you.

Safety Information

Laser safety labels
Warning:
w
The performance of procedures and adjustments other than those specified in the printer's
documentation may result in hazardous radiation exposure. Your printer is a Class 1 laser
product as defined in the IEC60825 specifications. A label similar to the one shown below is
attached to the back of the printer in countries where required.
Epson AcuLaser CX37 Series Safety Information Guide
Safety Instructions 7