Epson EMP-7850 Installationshandbuch Seite 65

What If the Projector You Want does not Appear?
6
The IP address is added to the list of registered projectors, and the
"Searching" icon is displayed. If a projector is found, the projector name
will be displayed on the list. Repeat Step 5 to register other projectors.
The registered projector is added to the list.
Tip :
• A maximum of 16 projectors can be added. A maximum of four projectors can be
connected at once.
• To delete a projector from a list, select the projector then click on the "<Delete" button.
7 Click "OK" if you want to add all of the registered projectors to the list.
The message "Save group. OK?" will be displayed. Click the "Yes"
button.
The group is saved.
If you click "No" in response to the message screen, the group will not be
saved.
Tip :
The message "Same group name exists. Overwrite?" is displayed when editing and
saving the existing group, or, if a group of the same name as the group you are saving
already exists. If you click the "Yes" button the group will be overwritten. If you wish to
save under a different name, click the "No" button. Enter a new group name in the
"Connection Group" list of the Advanced screen, and click "OK".
64
The projector's condition is indicated by the colour and appearance of its icons
(Gray) : Not connected
(Orange): Connected to another computer
: Search in progress
: Nothing was found during searching