Epson EMP-7850 Installationshandbuch Seite 24

Tip :
If the wireless LAN card is not inserted in the card slot on the projector, the following
screen is displayed. If a wireless LAN card is installed, the screen from Step 3 is
displayed.
4
Ensure that the "Config" button at the lower right on the screen is
selected, and press the [Enter] button on the remote control.
The Network advanced settings screen is displayed.
5 Ensure that the cursor is positioned on "Easy connect mode", and press
the [Enter] button on the remote control.
This selects "Easy connect mode".
23