Epson EMP-7850 Installationshandbuch Seite 49

Connecting in Access Point Mode or Wired LAN Connection Mode
SNMP
SNMP
address
* The item contents will be cleared if you select the "Clear" button on the selected
item and press [Enter] on the remote control.
48
trap IP Enter the IP address of the computer notified of an SNMP
1/2 trap . If notification does not arrive at the IP address
designated by "SNMP trap IP address 1", notification is sent
to the IP address designated by "SMNP trap IP address 2".
Numbers between 0-255 can be input for each of the fields of
the address.
However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0-255.255.255.255 (where x is a number
between 0-255).