Epson EMP-7850 Installationshandbuch Seite 46

Basic
Projector name
ESSID
Password for
WEB control
Projector
keyword
DHCP
Enter a name for the projector. This name is used to identify
the projector when connected to the network.
Up to 16 single-byte alphanumeric characters can be entered.
Not displayed in the Wired LAN advanced settings screen.
Enter the ESSID. If the wireless LAN system used has an
ESSID, enter that value. The initial value is "EPSON."
Up to 16 single-byte alphanumeric characters can be entered.
If you enter a password, entry of that password will be
required when using EasyWeb, and when starting EMP
Monitor.
Up to 8 single-byte alphanumeric characters are available.
If the projector keyword option is set to "ON", keyword entry
will be required when connecting to the projector over a
network. Use this function to prevent unintended or
unauthorized access to the projector during presentations, from
other points on the wireless LAN.
This option should normally be "ON".
Indicates DHCP use.
"ON": enables DHCP
"OFF": disables DHCP
45