Operation; Connections - PIONEER DJ DDJ-SR2 Bedienungsanleitung

Operation

Connections

1 Connect headphones to the [PHONES] terminal.
2 Connect powered speakers, a power amplifier,
components, etc. to the [MASTER 1] or [MASTER 2]
terminal.
To output sound from the [BOOTH] terminals, connect speakers,
etc. to the [BOOTH] terminals.
For details on connecting to the input/output terminals, see the
Operating Instructions.
3 Connect this unit to your computer using a USB cable.
USB cable
(included)
4 Turn the computer on.
5 Connect the AC adapter.
AC adapter
(included)
To power outlet
Powered speaker, etc.
6 Press the [STANDBY/ON] switch on the rear panel of
this unit to turn this unit on.
This unit turns on.
For Windows users
[Installing device driver software] may appear when this unit
is connected to the computer for the first time or connected to a
different USB port on the computer. Wait for a while until [Your
devices are ready for use] appears.
7 Turn on the devices connected to the output
terminals (powered speakers, power amplifier,
components, etc.).
When a microphone, DJ player or other external device is con-
nected to the input terminals, the connected device also turns
on.
9
En